- Sort by Popularity
- Display 12 Products per page
-
293-146-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 25-50 mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 25 – 50 mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-246-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 50 – 75 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-584 | Digimatic Outside Micrometer Series 293, 350-375 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 350-375 mm
Order No. 293-584
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
102-708 | Ratchet Thimble Micrometer Series 102 – Outside Micrometer, 25-50 mm, 0.001 mm | MITUTOYO
Ratchet Thimble Micrometer – Outside Micrometer
Range : 25-50 mm
Graduation : 0.001 mm
Order No. 102-708• More accurate in easy one-handed operation.
• Ratchet function works both from the thimble and the speeder.
• Rotating the thimble/speeder causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
• Heat-insulated frame.
• Measuring faces: Carbide. -
103-168 | Outside Micrometer Series 103, 775-800 mm | Mitutoyo
Outside Micrometer Series 103
Range 775-800 mm
Graduation 0.01 mm
Order No. 103-168
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-205 | Indicator Type Micrometer Series 107, 100-125 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 100-125 mm
Order No. : 107-205
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-133 | Groove Micrometers -Rotating Spindle Series 146 – 1-2″, 0.5″ Flange | MITUTOYO
Groove Micrometers – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-133
Flange : 0.5 mm
-
422-361-30 | Blade Micrometer – non rotating spindle type – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422
Range: 1-2″
Order No.: 422-361-30
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-720 | Outside Micrometer with Interchangeable Anvils, 12-18″ | MITUTOYO
340-720
Outside Micrometer with Interchangeable Anvils | 12-18″
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
104-147A | Outside Micrometer with Interchangeable Anvils, 800-900 mm | MITUTOYO
Order No. 104-147A
Outside Micrometer with Interchangeable Anvils
Range : 800-900 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
125-115 | Screw Thread Micrometer, 50-75 mm, 5.5-7 mm / 4.5-3.5TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-115
Range : 50 – 75 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-104 | Disk Micrometer – Hardened Steel Disk Series 123, 75-100 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-104
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range).
