- Sort by Price
- Display 12 Products per page
-
323-250-30 | Disk Micrometer Series 323, 0-25 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-250-30
Range : 0-25mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
147-103 | Can Seam Micrometers Series 147 – ไมโครมิเตอร์วัดกระป๋อง | MITUTOYO
Can Seam Micrometers Series 147
ไมโครมิเตอร์วัดกระป๋อง
Order No. : 147-103
Range 0-13 mm
• Measures the width, height, and depth of can seams.
-
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
157-903 | OPTICAL PARALLELS – SERIES 157 | MITUTOYO
OPTICAL PARALLELS SET, METRIC 0-25 mm
Order No. 157-903
Description
• Designed to inspect parallelism and flatness of measuring faces of micrometers.
• Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. -
324-251-30 | Gear Tooth Micrometer IP65, 0-25 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 324-251-30
Range : 0-25 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• IP65 Digimatic gear tooth micrometers.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Ball anvil / spindle tips: optional. -
147-301 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-301
Range : 0-25 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
345-250-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 5-30mm | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-250-30
Range: 5-30 mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
156-105-10 | Micrometer Stands – Series 156 | MITUTOYO
MICROMETER STANDS – SERIES 156
Description
• Dedicated stand for micrometers.
• Designed to allow benchtop use of hand micrometers or other gages which have frames suitable for gripping by the clamp.
Reduces the influence of temperature changes due to body heat, enabling higher accuracy measurement.Order No. 156-105-10
-
389-261-30 | Sheet Metal Micrometer IP65, 0-25mm, Spherical Anvil | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-261-30
Range : 0-25 mm
Measuring Surface : Spherical / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
342-371-30 | Crimp Height Micrometer, 0-0.8″ | MITUTOYO
CRIMP HEIGHT MICROMETER
Range : 0-0.8″
Order No. 342-371-30
• Measures the height of crimp contacts.
• Equipped with Ratchet Stop for constant measuring force.
• IP65 water / dust protection (Digimatic model). -
133-143 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 50-70mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-143
Range : 50-75mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
137-208 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE, 50-500mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE
Order No.: 137-208
Range : 50-500mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
