- Sort by Popularity
- Display 12 Products per page
-
345-350-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 0.2-1.2″ | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-350-30
Range: 0.2-1.2″
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
511-715-20 | BORE GAGE SERIES 511, 160-250mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-715-20
Range: 160-250 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
177-294 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-294
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
167-334 | Setting Standard for V-Anvil Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR V-ANVIL MICROMETER – SERIES 167
• Specially designed for accurately setting V-anvil micrometers.
Order No. 167-334
-
150-824 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-824
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
342-251-30 | Point Micrometer – Series 342, 0-25 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-251-30
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
146-222 | Groove Micrometers -Non-Rotating Spindle Series 146 – 0-25 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-222
Flange : 12.7 mm
• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle. -
122-102-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 25-50 mm
Order No.: 122-102-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
343-252-30 | Caliper Type Micrometers Series 343, 50-75 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-252-30
Range : 50-75 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
125-118 | Screw Thread Micrometer, 75-100 mm, 2-3 mm / 13-9 TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-118
Range : 75-100 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-101 | Disk Micrometer – Hardened Steel Disk Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-101
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-251-30 | Disk Micrometer, IP65 – 25-50 mm, Non-Rotating Spindle, Disk=20mm | MITUTOYO
Disk Micrometer- IP65, Non-Rotating Spindle
Order No. : 369-251-30
Range : 25-50 mm
Disk : 20 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force.
