- Sort by Popularity
- Display 12 Products per page
-
468-979 | Digimatic Holtest – 3-point Internal Micrometers Set (Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Interchange-Head Set
Order No. : 468-979
Range : 2-4″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-177 | Holtest – Three-Point Internal Micrometer Holtest 175-200mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-177
Range. 175-200mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-993 | Holtest (Type II) – 3 Point Internal Micrometer Set 50-100mm (4 pcs.) | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST SET (TYPE II) MITUTOYO
Order No. : 368-993
Range: 50-100mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-930 | ABSOLUTE BOREMATIC SERIES 568 – INTERCHANGEABLE-HEAD BORE GAGE STES | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
INTERCHANGEABLE-HEAD BORE GAGE STES
Order No. : 568-930
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
137-201 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE, 50-150mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE
Order No.: 137-201
Range : 50-150 mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
511-703 | BORE GAGE SERIES 511, 50-150mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-703
Range: 50-150 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
511-827-20 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 400-600mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-827-20
Range: 400-600 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
177-423 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-423
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
611804 | Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 175mm | Mitutoyo
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 175mm | Mitutoyo
Order No. : 611804
Length : 175 mm
Description :
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm. -
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
157-903 | OPTICAL PARALLELS – SERIES 157 | MITUTOYO
OPTICAL PARALLELS SET, METRIC 0-25 mm
Order No. 157-903
Description
• Designed to inspect parallelism and flatness of measuring faces of micrometers.
• Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. -
317-351-30 | “Uni-Mike” Digital Interchangeable Anvil Micrometer, 0-1″, IP65 | MITUTOYO
“Uni-Mike” Digital Interchangeable Anvil Micrometer Series 317
Order No. 317-351-30
Range : 0-1″
• A selection of interchangeable anvils (rod anvils and V-anvils) enables measurement of tube thickness, rivet head height and similar features just by replacing the anvil to suit.
• IP65 water / dust protection (series 317).
• Equipped with Ratchet Stop for constant measuring force.
