- Sort by Price
- Display 12 Products per page
-
511-761 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-761
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
311-111 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
182-501-50 | STANDARD SCALES SERIES 182 – Made of Low Expansion Glass | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are considered top-grade length standards.
• Standard scales can be used as a traceable standard of length for calibrating measuring instruments.
-
141-001 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-001
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
-
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
193-112 | Digit outside Micrometer Series 193, 25-50 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 25-50 mm
Order No. : 193-112
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
137-013 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit)
CARBIDE-TIPPED
Order No. 137-013
Range : 50-63 mm
Description :
• Micrometer head for Extension-Rod Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force.
