- Sort by Popularity
- Display 24 Products per page
-
500-160-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-160-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
515-111 | AUXILIARY BLOCK KIT SERIES 515 – for BORE GAGE – OPTIONAL ACCESSORIES | MITUTOYO
• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.
-
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
340-524 | Outside Micrometer with Interchangeable Anvils, 700-800 mm | MITUTOYO
340-524
Outside Micrometer with Interchangeable Anvils | 700-800 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
149-802-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-802-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
468-981 | Digimatic Holtest – 3-point Internal Micrometers Set (Non-Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Non-Interchange-Head Set
Order No. : 468-981
Range : 6-12mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-179 | Holtest – Three-Point Internal Micrometer Holtest 225-250mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-179
Range. 225-250mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
137-205 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE, 50-1500mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE
Order No.: 137-205
Range : 50-1500mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
141-118 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE , 200-1000mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-118
Range: 200-1000mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
511-722-20 | BORE GAGE SERIES 511, 35-60mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-722-20
Range: 35-60 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
551-331-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-331-10
Range : 0-300mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
182-514-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
