- Sort by Popularity
- Display 12 Products per page
-
543-791B | ABSOLUTE Digimatic Indicator ID-SX – SERIES 543 | MITUTOYO
ABSOLUTE Digimatic Indicator ID-SX
Order No. 543-791B
Description
• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions.
• IP53 dust /water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B
• These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) scale, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this scale ensures that overspeed errors do not occur, which improves reliability.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
543-783 | ABSOLUTE Digimatic Indicator ID-SX – SERIES 543 | MITUTOYO
ABSOLUTE Digimatic Indicator ID-SX
Order No. 543-783
Description
• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions.
• IP53 dust /water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B
• These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) scale, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this scale ensures that overspeed errors do not occur, which improves reliability.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
368-764 | Holtest (Type II) – 3 Point Internal Micrometer 12-16mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-764
Range: 12-16mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
526-101 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 7-10mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
Order No.: 526-101
Range: 7 -10 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø7 to 18 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
516-822 | Square Gauge Block Sets : Series 516 (Wear block set) | MITUTOYO
Square Gauge Block Sets : Series 516
(Wear block set)
Order No. 516-822
Description :
Square gauge block sets have several unique characteristics.
A wide choice is provided to best match the target applications: sets containing from 2 to 112 blocks are available.It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly.
-
614579 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614579
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614517 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614517
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614656 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614656
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
615611 | Individual Metric Square Gauge Blocks (Wear Blocks) | MITUTOYO
Individual Metric Square Gauge Blocks (Wear Blocks)
Order No. 615611
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
368-775 | Holtest (Type II) – 3 Point Internal Micrometer 125-150mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-775
Range: 125-150mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
516-605 | Accessories for Rectangular Gauge Blocks over 100 mm | Mitutoyo
Accessories for Rectangular Gauge Blocks over 100 mm
Order No. 516-605
Description :
• Specially designed for long rectangular gauge blocks of 100 mm and over which have two coupling holes in the body: coupling of two long gauge blocks, a stack of regular gauge blocks and attachment of jaws is possible.
• These accessories can be used for long steel or CERA blocks. -
614527 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614527
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly.
