- Sort by Popularity
- Display 36 Products per page
-
614628 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614628
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
543-500 | ABSOLUTE Solar-Powered Digimatic Indicator ID-SS – SERIES 543 | MITUTOYO
ABSOLUTE Solar-Powered Digimatic Indicator
ID-SSOrder No. 543-500
Description
• Solar powered, this series consists of environmentally friendly measuring instruments that do not require batteries, eliminating the need for battery replacement.
Their minimum operating luminance is 40 lux (lx), lower than that inside a warehouse.• The large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under lighting conditions below the minimum level.
• All functions can be accessed by using the two or three large buttons on the front of the indicator.
• Origin recorded even if display disappears. The indicator includes an ABS (absolute) scale that allows the previously set origin to be restored even if the display disappears due to insufficient lighting, making it easy to resume measurement. This feature makes ID-SS ideal for long-time or multi-point measurement.
• Three types of accessories (optional) are available to enable spindle lifting in various measurement settings.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
368-778 | Holtest (Type II) – 3 Point Internal Micrometer 200-225mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-778
Range: 200-225mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
516-440 | Square Gauge Block Sets : Series 516 | MITUTOYO
Square Gauge Block Sets : Series 516
Order No. 516-440
Description :
Square gauge block sets have several unique characteristics.
A wide choice is provided to best match the target applications: sets containing from 2 to 112 blocks are available.It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly.
-
614561 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614561
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614594 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614594
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614647 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614647
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614663 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614663
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
543-506B | ABSOLUTE Solar-Powered Digimatic Indicator ID-SS – SERIES 543 | MITUTOYO
ABSOLUTE Solar-Powered Digimatic Indicator
ID-SSOrder No. 543-506B
Description
• Solar powered, this series consists of environmentally friendly measuring instruments that do not require batteries, eliminating the need for battery replacement.
Their minimum operating luminance is 40 lux (lx), lower than that inside a warehouse.• The large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under lighting conditions below the minimum level.
• All functions can be accessed by using the two or three large buttons on the front of the indicator.
• Origin recorded even if display disappears. The indicator includes an ABS (absolute) scale that allows the previously set origin to be restored even if the display disappears due to insufficient lighting, making it easy to resume measurement. This feature makes ID-SS ideal for long-time or multi-point measurement.
• Three types of accessories (optional) are available to enable spindle lifting in various measurement settings.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
543-793B | ABSOLUTE Digimatic Indicator ID-SX – SERIES 543 | MITUTOYO
ABSOLUTE Digimatic Indicator ID-SX
Order No. 543-793B
Description
• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions.
• IP53 dust /water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B
• These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) scale, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this scale ensures that overspeed errors do not occur, which improves reliability.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
368-906 | Holtest – Two-Point Internal Micrometer Holtest Set – 2-3mm(2 pcs.) | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST SET | MITUTOYO
Order No. 368-906
Range: 2-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering. -
568-471 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 2-2.5″ | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 2.5-3″
Order No. : 568-471
Description :
This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
It offers you the following benefits:- It enables you to take measurements easily and quickly.
- Titanium-coated measuring pins gives you excellent durability and impact resistance.
- 330° rotatable display unit also gives you easy reading at any angle.
- GO/NG tolerance judgement function.
