- Sort by Price
- Display 36 Products per page
-
139-001 | TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit)
Order No. 137-019
Range : 50-63 mm
Description :
• Micrometer head for Extension-Pipe Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings, CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
506-207 | VERNIER HEIGHT GAGE SERIES 506 – STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE, 0-200mm | MITUTOYO
VERNIER HEIGHT GAGE SERIES 506
STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE
Order No. 506-207
Range : 0 – 200mm
Description :
This vernier height gauge offers you the following benefits:
- You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales.
- A carbide-tipped scriber is provided.
-
422-230-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-230-30
Range : 0-25 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
573-605-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-160mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-605-20
Range 10.1-160 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
526-170-10 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 0.95-1.55mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-170-10
Range: 0.95-1.55 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
530-101 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm
Order No. 530-101
Range : 0 – 150mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
324-251-30 | Gear Tooth Micrometer IP65, 0-25 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 324-251-30
Range : 0-25 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• IP65 Digimatic gear tooth micrometers.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Ball anvil / spindle tips: optional.