Mitutoyo แบรนด์เครื่องมือวัดละเอียด ชั้นนำจากประเทศ ญี่ปุ่น มาตรฐานสากล ทาง JSR GROUP เป็นผู้นำเข้าและจัดจำหน่ายอย่างเป็นทางการ ไม่ว่าจะเป็นเครื่องมือวัดคุณภาพสูง เครื่องมือวัดละเอียด เครื่องมือวัดทางด้านมิติ Micrometer Digital caliper
- Sort by Popularity
- Display 12 Products per page
-
156-102 | Micrometer Stands – Series 156 | MITUTOYO
MICROMETER STANDS – SERIES 156
Description
• Dedicated stand for micrometers.
• Designed to allow benchtop use of hand micrometers or other gages which have frames suitable for gripping by the clamp.
Reduces the influence of temperature changes due to body heat, enabling higher accuracy measurement.Order No. 156-102
-
167-133 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-133
Length : 825 mm
-
167-389 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-389
Length : 1625 mm
-
167-278 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Whitworth θ = 55°
Order No. 167-278
-
301709 | Color Speeder Cover for Analog Micrometer 0-300mm, Red | MITUTOYO
MICROMETER SPEEDER COVERS PLASTIC
FOR ANALOG MICROMETER 0-300 mm, Red
Order No. 301709
-
148-203-10 | Micrometer Heads – Ultra-small Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – ULTRA-SMALL – SERIES 148
Clamp nut
Order no. 148-203-10
Range: 0-6.5mm
Description :
• Miniature micrometer heads for ease of incorporating into machines.
-
148-853 | Micrometer Heads – Small Thimble Dimeter Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148
Order no. 148-853
Range: 0-13mm
Description :
• Measuring range of 13 mm.
• The thimble can be set to zero at any position by loosening the setscrew. -
151-226-10 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-226-10
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
148-132-10 | Micrometer Heads – Fine Spindle Feed of 0.25mm/rev – SERIES 148 | MITUTOYO
MICROMETER HEAD – FINE SPINDLE FEED OF 0.25mm/rev – SERIES 148
MITUTOYO
Order no. 148-132-10
Range: 0-13mm
Description :
• Micrometer head with 0.25 mm spindle pitch is convenient for fine-feed and fine-positioning applications.
-
303562 | Fixture for Micrometer Head | MITUTOYO
FIXTURE FOR MICROMETER HEAD | MITUTOYO
Order No. : 303562
Description :
Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
- These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
- Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.
-
468-173 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-173
Range : 87-100 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
468-973 | Digimatic Holtest – 3-point Internal Micrometers Set (Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Interchange-Head Set
Order No. : 468-973
Range : 20-50 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.
