- Sort by Popularity
- Display 24 Products per page
-
513-415-10E | Dial Test Indicator SERIES 513 — Horizontal Type | MITUTOYO
Dial Test Indicator SERIES 513 — Horizontal Type Contact point No. 136013 | MITUTOYO
* We guarantee the accuracy of completed products by inspecting them with the dial face facing upward. Note: Stem with dovetail groove is not included in the mass.
-
515-724 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
536-121 | POINT CALIPER SERIES 536, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 536
Order No.: 536-121
Range : 0-150 mm
Description :
This vernier point caliper has extra fine ground measuring jaws. It offers you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
515-720 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
326-251-30 | Screw Thread Micrometer- Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometers
Order No. 326-251-30
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional. -
Setting Standard for V Anvil Micrometers SERIES 167 Mitutoyo
Setting Standard for V Anvil Micrometers SERIES 167 Mitutoyo
-
293-180-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 0-1″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 0-1″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-331-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Inch / Metric
Range : 1-2″ mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-584 | Digimatic Outside Micrometer Series 293, 350-375 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 350-375 mm
Order No. 293-584
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
102-707 | Ratchet Thimble Micrometer Series 102 – Outside Micrometer, 0-25 mm, 0.001 mm | MITUTOYO
Ratchet Thimble Micrometer – Outside Micrometer
Range : 0-25 mm
Graduation : 0.001 mm
Order No. 102-707• More accurate in easy one-handed operation.
• Ratchet function works both from the thimble and the speeder.
• Rotating the thimble/speeder causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
• Heat-insulated frame.
• Measuring faces: Carbide. -
103-166 | Outside Micrometer Series 103, 725-750 mm | Mitutoyo
Outside Micrometer Series 103
Range 725-750 mm
Graduation 0.01 mm
Order No. 103-166
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-203 | Indicator Type Micrometer Series 107, 50-75 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 50-75 mm
Order No. : 107-203
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer.
