Small Tool

SETTING RING

Accessories for Inside Micrometers, Hotest and Dial Bore Gages

Brand : MITUTOYO

Order No. 177-296

Description :

• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.)

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER

Order No. : 468-168

Range : 30-40 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.

TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE

Order No.: 139-174

Range : 100-900mm

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.

BORE GAGE SERIES 511

Order No.: 511-723-20

Range: 50-150 mm

Description:

• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request.

SETTING RING

Accessories for Inside Micrometers, Hotest and Dial Bore Gages

Brand : MITUTOYO

Order No. 177-423

Description :

• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.)

INSIDE MICROMETER SERIES 345 – CALIPER TYPE

Order No. 345-250-30

Range: 5-30 mm

Description:

• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 87-100mm

Order No. : 568-373

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES

บอร์เกจ – สำาหรับรูขนาดเล็กมาก

Order No.: 526-160-10

Range: 1.50-3.95 mm

Description:

• These gages are designed to measure the diameters of very small holes.

• The indicator (dial indicator, Digimatic indicator) and dial protection cover are optional. Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.

• An optional stand (215-120-10) is available for efficient measurement of multiple small holes.

BORE GAGE SERIES 511 FOR BLIND HOLES

Order No.: 511-426-20

Range: 35-60mm

Description :

• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes.

Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 125mm | Mitutoyo

Order No. : 611802

Length : 125 mm

Description :

• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm.

QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm

• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 1.6-2″

Order No. : 568-469

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).