- Sort by Popularity
- Display 24 Products per page
-
530-108 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-108
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-502 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-1000mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-502
Range : 0 – 1000 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
570-248 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-40″ | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-248
Range : 0-40″
Description :
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- Fine-adjustment gives you precise positioning.
- It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments (570-3xx only).
- A carbide-tipped scriber is provided.
- SPC data output.
-
530-123 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*High accuracy model*
Order No. 530-123
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-104 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-104
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-109 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-109
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-316 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*Clamping screw below the slider
Order No. 530-316
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-124 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*High accuracy model*
Order No. 530-124
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-312 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.03mm
Order No. 530-312
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-100 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-100mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-100
Range : 0 – 100 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-114 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm/0-8″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-114
Range : 0-200mm/0-8″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-102 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-102
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
