- Sort by Popularity
- Display 12 Products per page
-
573-719-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – EDGE-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-719-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
536-151 | NECK CALIPER SERIES 536 – VERNIER TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
VERNIER TYPE
Order No.: 536-151
Range : 0-150 mm
Description :
• Can measure wall thickness inside bores and recesses.
-
H210 | Internal measurement – Measuring range : 10-30 mm | KROEPLIN
Internal measurement
Measuring range : 10-30 mm
Order No. : H210
-
505-730 | DIAL CALIPER SERIES 505 – 0-150mm | MITUTOYO
DIAL CALIPER SERIES 505
Order No.: 505-730
Range : 0-150 mm
Description :
This metric dial caliper allows you to take reliable measurements and offers you the following benefits:
- Ultra-smooth sliding and high shock protection
- Easy to read dial with large character height
-
500-719-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-719-20
Range : 0 – 150 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-156-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-156-30
Range : 0-200 mm
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
500-454 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-454
Range : 0-150 mm
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
532-120 | VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT 0-180mm/0-7″ | MITUTOYO
VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT
Order No.: 532-120
Range : 0-180 mm / 0-7 in
Description :
• Fine-adjustment aids slider positioning.
• Allows step measurement. -
914053 | CLAMP BOX – OPTION ACCESSORIES | MITUTOYO
CLAMP BOX – OPTION ACCESSORIES | MITUTOYO
Order No. : 914053
for Item : 552-302-10 / 552-155-10 / 552-303-10 / 552-156-10
552-312-10 / 552-165-10 / 552-313-10 / 552-166-10
-
07CZA044 | INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES | MITUTOYO
INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES
Order No.: 07CZA044
Type: Surface Plate Type
-
573-602-20 | OFFSET CALIPER – SERIES 573 -ABSOLUTE Digimatic type, 0-200mm | MITUTOYO
OFFSET CALIPER – SERIES 573 -ABSOLUTE Digimatic type
Order No.: 573-602-20
Range : 0-200 mm
Description :
• The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.
-
536-135 | BLADE TYPE CALIPER SERIES 536, 0-200mm | MITUTOYO
BLADE TYPE CALIPER SERIES 536
Order No.: 536-135
Range : 0-200 mm
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits:
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
