- Sort by Popularity
- Display 12 Products per page
-
573-704-20 | OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-12″ | MITUTOYO
OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-704-20
Range : 0-12″
Description :
These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:- You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.
-
573-648-20 | ABSOLUTE INSIDE CALIPER SERIES 573, POINT JAW TYPE, 20.1-170mm | MITUTOYO
ABSOLUTE INSIDE CALIPER SERIES 573
INSIDE GROOVE TYPE
(Without thumb roller)
Order No.: 573-648-20
Range : 20.1-170 mm
Description :
These inside calipers enable measurements inside a groove
They offer you the following benefits:- Specially designed for measurements in hard-to-reach places.
-
L102 | Internal measurement – Measuring range : 2.5-12.5 mm | KROEPLIN
Internal measurement
Measuring range : 2.5-12.5 mm
Order No. : L102
-
500-702-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Comforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER with Dust/Water Protection Comforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-702-20
Range : 0 – 150 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-785 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-785
Range : 0-68″
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
-
500-155-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-155-30
Range : 0-150 mm
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
500-506-10 | LONG ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with Exclusive ABSOLUTE Encoder Technology | MITUTOYO
LONG ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with Exclusive ABSOLUTE Encoder Technology
Order No.: 500-506-10
Range: 0 – 24″
Deacription :
• Long Digital caliper incorporating an ABSOLUTE scale and available with a measuring range from 450 mm to 1000 mm.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.
-
530-119 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm/0-12″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.04mm
Order No. 530-119
Range : 0-300mm/0-12″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-227-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-40″/0-1000mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-227-10
Range : 0-40″/0-1000mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-165-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES – with Ceramic Jaws, 0-24″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Ceramic Jaws
Order No. : 552-166-10
Range : 0-24″
Description :
This is a lightweight standard model of Digimatic caliper with ceramic jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
160-106 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-40″/0-1000mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-106
Range: 0-40″ / 0-1000 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
573-708-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0.404-12.4″ | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-708-20
Range 0.404-12.4″
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
