- Sort by Popularity
- Display 12 Products per page
-
573-626-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-626-20 (without thumb roller)
Range : 0-150 mm
Description :
These point calipers have extra fine ground measuring jaws. They offer you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
536-172 | HOOK TYPE VERNIER CALIPER SERIES 536, 0-200mm | MITUTOYO
HOOK TYPE VERNIER CALIPER SERIES 536
Order No. 536-172
Range : 0-200 mm (2.1-200)
Description :
• Allows measurement of stepped inside Measurement example diameter section of cylinders.
• 536-172 is equipped with a fine-adjustment wheel to enable precise feed and adjustment. -
H415 | Internal measurement – Measuring range : 15-65 mm | KROEPLIN
Internal measurement
Measuring range : 15-65 mm
Order No. : H415
-
573-634-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
573-634-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
BLADE TYPE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-634-20
Range : 0-150 mm
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits:
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
-
531-101 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-150mm | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-101
Range : 0-150 mm
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
500-738-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-738-20
Range : 0-8″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-197-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-197-30
Range : 0-8″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-320 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-320
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
550-223-10 | ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS 0-18″/0-450mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS
Order No. : 550-223-10
Range : 0-18″/0-450mm
Description :
This is a Digimatic caliper with nib-style jaws that lets you measure inside dimensions.
It offers you the following benefits:- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
914058 | DISTANCE MEASUREMENT JAW – OPTION ACCESSORIES | MITUTOYO
DISTANCE MEASUREMENT JAW – OPTION ACCESSORIES
Order No. : 914058
For item : 552-312-10 / 552-165-10 / 552-313-10 / 552-156-10 / 552-314-10 / 552-315-10 / 552-316-10
-
160-132 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-1000mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-132
Range: 0-1000 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
573-702-20 | OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-8″ | MITUTOYO
OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-702-20
Range : 0-6″
Description :
These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:- You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.
