- Sort by Popularity
- Display 12 Products per page
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
536-105 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-150mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-105
Range : 10.1-150 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
573-654-20 | NECK CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-654-20
Range : 0-150 mm
Description :
• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable.
L850 | Internal measurement – Measuring range : 50-150 mm | KROEPLIN
Internal measurement
Measuring range : 50-150 mm
Order No. : L850
536-171 | HOOK TYPE VERNIER CALIPER SERIES 536, 0-200mm | MITUTOYO
HOOK TYPE VERNIER CALIPER SERIES 536
Order No. 536-171
Range : 0-200 mm (10.1-200)
Description :
• Allows measurement of stepped inside diameter section of cylinders.
500-708-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-708-20
Range : 0-300 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems.
500-175-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-175-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.
500-475 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-475
Range : 0-8″
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
531-109 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-300mm/0-12″ | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-109
Range : 0-300mm/0-12″
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
552-314-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-40″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-314-10
Range : 0-40″
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:
07CZA059 | INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES | MITUTOYO
INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES
Order No.: 07CZA059
Type: Inside Point Type
534-115 | LONG JAW VERNIER CALIPER-SERIES 534, 0-750mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-115
Range : 0-750 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:
573-635-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
BLADE TYPE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
(Without Thumb roller)
Order No.: 573-635-20
Range : 0-150 mm
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits: