- Sort by Popularity
- Display 12 Products per page
-
611858 | Individual Metric Rectangular Gauge Blocks – 131.4mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 131.4mm | Mitutoyo
Order No. : 611858
Length : 131.4 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
PROVASET T3LD – EQUIPMENT FOR LEAK TESTS BY DIFFERENTIAL METHOD | MARPOSS
Provaset T3LD
EQUIPMENT FOR LEAK TESTS
BY DIFFERENTIAL METHOD
• Leak tests with full scale up to 40 bar and in vacuum
• Resolution of 0.1 Pa (0.001 mbar)
• 7” colour LCD display with touchscreen
• 300 test programs
• 300 test sequences
• Digital I/O interfaces for PLCs, RS232/ RS485 serial lines, USB for PC, Ethernet, Profinet -
515-376 | DIGITAL HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
L4100 | Internal measurement – Measuring range : 100-150 mm | KROEPLIN
Internal measurement
Measuring range : 100-150 mm
Order No. : L4100
-
500-150-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-150-30
Range : 0-100 mm
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
343-350-30 | Caliper Type Micrometers Series 343, 0-1″ | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-350-30
Range : 0-1″
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
527-201 | VERNIER DEPTH GAGE SERIES 527, 0-150mm | MITUTOYO
VERNIER DEPTH GAGE SERIES 527
Order No. 527-201
Range : 0-150 mm
Description :
This vernier depth gauge offers you the following benefits:
- Its base and measuring faces are hardened and micro-lapped for robustness.
- Fine adjustment models available
-
105-408 | Outside Micrometer with Anvil Extension Collars 1000-1100 mm | MITUTOYO
Order No. 105-408
Outside Micrometer with Anvil Extension Collars
Range : 1000-1100 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
04GAZ239 | Micrometer Ratchet Stop Plastic for Analog Micrometer 0-300mm, Gray | MITUTOYO
MICROMETER RATCHET STOP PLASTIC
FOR ANALOG MICROMETER 0-300 mm, Gray
Order No. 04GZA239
-
293-186-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 1-2″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 1-2″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.
