- Sort by Popularity
- Display 12 Products per page
-
293-146-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 25-50 mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 25 – 50 mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-246-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 50 – 75 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-676-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 0-1.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-676-20
Range : 0-1.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-303 | Outside Micrometer Series 102, 50-75 mm, 0.01mm | MITUTOYO
Outside Micrometer Series 102
Range : 50-75 mm
Graduation : 0.01 mm
Order No. : 102-303
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-161 | Outside Micrometer Series 103, 600-625 mm | Mitutoyo
Outside Micrometer Series 103
Range 600-625 mm
Graduation 0.01 mm
Order No. 103-161
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
193-114 | Digit outside Micrometer Series 193, 75-100 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 75-100 mm
Order No. : 193-114
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
146-122 | Groove Micrometers – Rotating Spindle Series 146 – 0-25 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometers -Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-122
Flange : 12.7 mm
-
422-232-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-232-30
Range : 50-75 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
122-162 | Blade Micrometer – non rotating spindle type (Carbide tip) – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type (Carbide Tip) – Series 122
Range: 25-50 mm
Order No.: 122-162-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-411 | Outside Micrometer with Anvil Extension Collars 1300-1400 mm | MITUTOYO
Order No. 105-411
Outside Micrometer with Anvil Extension Collars
Range : 1300-1400 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-105 | Caliper Type Micrometers Series 143, 100-125 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-105
Range : 100-125 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
326-353-30 | Digital Screw Thread Micrometer IP65 Interchangeable Anvil/Spindle Tip Type 2-3″ | MITUTOYO
Digital Screw Thread Micrometer IP65
Order No. 326-353-30
Range : 2-3″
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional.
