- Sort by Date
- Display 12 Products per page
-
FORMTRACER Avant C3000 / 4000 Series | MITUTOYO
FORMTRACER Avant C3000 / 4000 Series
Highly functional and user-friendly contour measuring systems with innovative design features.
-
ROUNDTRACER FLASH | MITUTOYO
ROUNDTRACER FLASH
Non-contact form measuring system based upon state-of-theart 2D image sensors.
The Perfect Combination of Precision and “Flash” Cycle Time
The 2D image architecture sets a new benchmark in the measuring industry, providing significant advantages.
High Speed
Unrivaled measuring speed, thanks to the no Z-axis movements. Full 2D optic.
Image Consistency
Complex profiles and part geometries are acquired inside the same image frame.
Axial Run-out
The 2D image frame allows for the entire surface to be captured dynamically, at each angle, during the part rotation.
Thru-holes Measurement
Only a few milliseconds are needed between the image acquisition and the measurement execution.
-
FORMTRACER Avant D3000/4000 Series | MITUTOYO
FORMTRACER Avant Series
Contour and Surface Roughness Measuring Systems
Highly functional and user-friendly surface texture measuring systems with innovative design features. Both surface roughness and contour measurement are available on a single system just by replacing the detector.
-
CRYSTA-Apex V SERIES | COORDINATE MEASURING MACHINES (CMM) | MITUTOYO
CNC Coordinate Measuring Machine
Standard CNC CMM CRYSTA-Apex V500/700/900 Series
Introducing a new generation CNC coordinate measuring machine
focused on accuracy, speed, and versatility.
-
TPG-700SKD TAPER GAUGE WITH KAIDAN SCALE เตเปอร์เกจสเกลขั้นบันไดพร้อมไม้บรรทัด | SK NIIGATA SEIKI
TAPER GAUGE WITH KAIDAN SCALE | SK NIIGATA SEIKI
Model No. : TPG-700SKD
Weight : 40g
USE : For measurement of groove, gap, hole diameter and length
Material : Hardened stainless steel (SUS420J2)
Features :
· Convenient Set, taper gauge 700A with 1300mm scale.Folds safely with pocket clip, easy to carry.
· 130mm scale with 1mm Kaidan graduation on the back for convenient use
· Satin finish -
ARTICULATED & CENTERING HOLDERS PLATINUM︱NOGA
ARTICULATED & CENTERING HOLDERS PLATINUM NOGA
NOGA PLATINUM Articulated & Centering Arms
Due to its stability and ease of use, NOGA PLATINUM Articulated & Centering Holders will be the most coveted in the industry.
• 3 different sizes of articulated arms are available for a wide range of applications.
• Central locking mechanism with NOGA designed spring loaded bearing.
• Anti-rust black finished arms.
• The NEW designs of Noga arms are more flexible for your positioning requirements.
• Instant locking in any position.
• New modified knob with Noga logo. -
CN-10 | BORE GAGE (CN type) for small holes | TECLOCK
BORE GAGE (CN type) for small holes
• These are bore gauges for small holes of which internal diameter is 18.5mm and high accuracy measuring is possible as well as standard type bore gauges.
-
CN-18 | BORE GAGE (CN type) for small holes | TECLOCK
BORE GAGE (CN type) for small holes
• These are bore gauges for small holes of which internal diameter is 18.5mm and high accuracy measuring is possible as well as standard type bore gauges.
-
2109A-70 | Dial Indicator SERIES 2 — Water-proof Type, 0.01 mm & 0.001 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Water-proof type dial indicators having a bezel with an outside diameter of 57 mm.
• O-rings and rubber bellows are used to prevent water and oil penetration.
• The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2046A-60 | Dial Indicator SERIES 2 — Water-proof Type, 0.01 mm & 0.001 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Water-proof type dial indicators having a bezel with an outside diameter of 57 mm.
• O-rings and rubber bellows are used to prevent water and oil penetration.
• The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2109A-10 | Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Standard 0.001 mm and 0.005 mm graduation dial indicators having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made ofhigh-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• A special alloy is used for the sector gears to provide improved wear resistance.
• The indicator uses jeweled bearings, providing excellent indication sensitivity and durability.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2046A-09 | Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
• Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
