- Sort by Name
- Display 12 Products per page
-
208063 | Spindle Attachment Tip Comparator for Micrometer Anvils 6.35mm | MITUTOYO
SPINDLE ATTACHMENT TIP COMPARATOR
Order No. 208063
Description
These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.
They offer the following benefits:- You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
- They can also be mounted on micrometer anvils ø 6.35 mm.
- The measuring range changes when a spindle attachment tip is mounted.
-
208064 | Spindle Attachment Tip Blade for Micrometer Anvils 6.35mm | MITUTOYO
SPINDLE ATTACHMENT TIP BLADE
Order No. 208064
Description
These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.
They offer the following benefits:- You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
- They can also be mounted on micrometer anvils ø 6.35 mm.
- The measuring range changes when a spindle attachment tip is mounted.
-
208065 | Spindle Attachment Tip Knife Edge for Micrometer Anvils 6.35mm | MITUTOYO
SPINDLE ATTACHMENT TIP KNIFE EDGE
Order No. 208065
Description
These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.
They offer the following benefits:- You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
- They can also be mounted on micrometer anvils ø 6.35 mm.
- The measuring range changes when a spindle attachment tip is mounted.
-
208066 | Spindle Attachment Tip Disk-Plate for Micrometer Anvils 6.35mm | MITUTOYO
SPINDLE ATTACHMENT TIP KNIFE DISK-PLATE
Order No. 208066
Description
These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.
They offer the following benefits:- You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
- They can also be mounted on micrometer anvils ø 6.35 mm.
- The measuring range changes when a spindle attachment tip is mounted.
-
2109A-10 | Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Standard 0.001 mm and 0.005 mm graduation dial indicators having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made ofhigh-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• A special alloy is used for the sector gears to provide improved wear resistance.
• The indicator uses jeweled bearings, providing excellent indication sensitivity and durability.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2109A-70 | Dial Indicator SERIES 2 — Water-proof Type, 0.01 mm & 0.001 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Water-proof type dial indicators having a bezel with an outside diameter of 57 mm.
• O-rings and rubber bellows are used to prevent water and oil penetration.
• The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
215-120-10 | BORE GAGE STAND SERIES 215 | MITUTOYO
BORE GAGE STAND SERIES 215
Order No. 215-120-10
Description :
• Optimal for efficient measurement of multiple small holes with a bore gage. (SERIES 526)
-
223-101 | Disk Micrometer Series 223, 0-25 mm | MITUTOYO
Disk Micrometer (Mechanical counter Model)
Order No. 223-101
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
223-102 | Disk Micrometer Series 223, 25-50 mm | MITUTOYO
Disk Micrometer (Mechanical counter Model)
Order No. 223-102
Range : 25-50 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
223-125 | Disk Micrometer Series 223, 0-1″ | MITUTOYO
Disk Micrometer (Mechanical counter Model)
Order No. 223-125
Range : 0-1″
-
227-201-20 | ABSOLUTE DIGIMATIC MICROMETER with Adjustable Measuring Force, 0-15 mm | MITUTOYO
ABSOLUTE DIGIMATIC MICROMETER
with Adjustable Measuring Force, 0-15 mm, 0.5-2.5N
Order No. 227-201-20
• Digimatic micrometer dedicated to applications requiring a constant / low measuring force such as measuring wire, paper, and plastic / rubber parts.
• Measuring data can be hold at the measuring force setting. This function provides stable measurement and repeatability.
• Measuring force is adjustable (in steps) to suit various kinds of workpieces.
• Non-rotating spindle.
• Measuring faces: Carbide. -
227-203-20 | ABSOLUTE Digimatic Micrometer with Adjustable Measuring Force Series 227, 15-30 mm, 0.5 – 2.5 N | MITUTOYO
ABSOLUTE Digimatic Micrometer
with Adjustable Measuring Force Series 227
Range : 15-30 mm
Order No. 227-203-20
Measuring force : 0.5 – 2.5 N
• Digimatic micrometer dedicated to applications requiring a constant / low measuring force such as measuring wire, paper, and plastic / rubber parts.
• Measuring data can be hold at the measuring force setting. This function provides stable measurement and repeatability.
• Measuring force is adjustable (in steps) to suit various kinds of workpieces.
• Non-rotating spindle.
• Measuring faces: Carbide.
