- Sort by Popularity
- Display 12 Products per page
-
568-371 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 62-75mm | MITUTOYO
568-371 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 62-75mm | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 62-75mm
Order No. : 568-371
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-959 | ABSOLUTE BOREMATIC SERIES 568 – INTERCHANGEABLE-HEAD BORE GAGE STES | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
INTERCHANGEABLE-HEAD BORE GAGE STES
Order No. : 568-959
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
133-169 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 700-725mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-169
Range : 700-725mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
139-173 | TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE, 100-500mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE
Order No.: 139-173
Range : 100-500mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
141-212 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED , 50-300mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE – CARBIDE TIPPED
Order No. 141-212
Range: 50-300mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
511-210-20 | BORE GAGE SERIES 511 – FOR SMALL HOLES, 6-10mm | MITUTOYO
BORE GAGE SERIES 511 – FOR SMALL HOLES
Order No. 511-210-20
Range: 6-10mm
Description :
• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request. -
511-764 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 100-160mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-764
Range: 100-160 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
953551 | EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
Order No. 953551
Description
• Extension Rods enable measurement of deeper holes when attached to a bore gage.
Note 1: When using an extension rod that is 500 mm or longer, hold the bore gage upright during measurement.
Note 2: Only one extension rod can be attached to a bore gage. It is not possible to use more than one extension rod.
Note 3: The extension rod cannot be used for products with a custom size or custom specifications.
-
177-125 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-125
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-420 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-420
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-734-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-734-20
Range : 0-8″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-160-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-160-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.
