- Sort by Popularity
- Display 12 Products per page
-
530-115 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm/0-12″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-115
Range : 0-300mm/0-12″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-226-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-30″/0-750mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-226-10
Range : 0-30″/0-750mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-165-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES – with Ceramic Jaws, 0-18″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Ceramic Jaws
Order No. : 552-165-10
Range : 0-18″
Description :
This is a lightweight standard model of Digimatic caliper with ceramic jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
160-103 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-24″/0-600mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-103
Range: 0-24″ / 0-600 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
573-706-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0.404-8.4″ | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-706-20
Range 0.404-8.4″
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
536-149 | INSIDE CALIPER SERIES 536, POINT JAW TYPE, 70.1-600mm | MITUTOYO
INSIDE CALIPER SERIES 536
POINT JAW TYPE
Order No.: 536-149
Range : 70.1-600 mm
Description :
• Dedicated caliper for inside measurement.
-
570-313 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – WITH ERGONOMIC BASE, 0-18″ | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
WITH ERGONOMIC BASE
Order No.: 570-313
Range: 0-18″
Description:
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- It comes with large and smooth-acting slider hand wheel
- A carbide-tipped scriber is provided.
- SPC data output.
-
518-245 | QM-HEIGHT SERIES 518 – HIGH-PERFORMANCE HEIGHT GAGE | MITUTOYO
QM-HEIGHT SERIES 518 – HIGH-PERFORMANCE HEIGHT GAGE
Order No. 518-245
Description :
This is a high precision ABSOLUTE Digital Height Gauge that offers you the
following benefits:- It has a high accuracy, high resolution ABSOLUTE linear encoder for position detection.
- Types with and without pneumatic drive mechanism
- Automatic running of prelearnt part programs
- You can easily implement frequently used measurements, such as inside/outside diameter and pitch calculations, by icon-based commands that also support easy one-key operation.
- Extraordinary battery life
- GO/±NG judgement is performed by setting the upper and lower tolerances.
-
983527 | INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES, 175-200mm | MITUTOYO
INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES
Order No. 983527
Range: 175-200mm
-
983529 | INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES, 150-175mm | MITUTOYO
INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES
Order No. 983529
Range: 150-175 mm
-
571-302-20 | DEPTH GAGE SERIES 571 – PIN END TYPE, 0-200mm | MITUTOYO
DEPTH GAGE SERIES 571 – PIN END TYPE | MITUTOYO
Order No. 571-302-20
Range : 0-200 mm
Description :
This Digital Depth Gauge is IP67 and offers you the following benefits:
- It has excellent resistance against water and dust (IP67 protection level) enabling you to use it in situations that include coolant fluid.
- Direct reading by pressing the OFFSET function, which compensates for the 10 mm width of the hook (hook type).
-
547-251 | ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 547, 0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 547
Order No. 547-251
Range : 0-200 mm
Description :
This ABSOLUTE Digimatic Indicator Depth Gauge offers you the following benefits:
- It is equipped with the ABSOLUTE Digimatic Indicator ID-C.
- It has a hardened, precision ground and micro-lapped reference face on its base.
