- Sort by Popularity
- Display 12 Products per page
-
L370 | Internal measurement – Measuring range : 70-100 mm | KROEPLIN
Internal measurement
Measuring range : 70-100 mm
Order No. : L370
-
573-718-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 -EDGE-TO-CENTER TYPE, 10.1-200mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-718-20
Range: 10.1-200 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
500-723-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-723-20
Range : 0-150 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-153-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-153-30
Range : 0-300 mm
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
500-463 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-463
Range : 0-4″
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
531-103 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-300mm | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-103
Range : 0-300 mm
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
552-303-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-600mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-303-10
Range : 0-600 mm
-
552-193-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-40″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-193-10
Range: 0-40″
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
534-107 | LONG JAW VERNIER CALIPER-SERIES 534, 0-750mm / 0-30″ | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-107
Range : 0-750 mm / 0-30″
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
573-621-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-621-20
Range : 0-150 mm
Description :
These point calipers have extra fine ground measuring jaws. They offer you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
573-761-20 | TUBE THICKNESS CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
TUBE THICKNESS CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No. 573-761-20
Range : 0-6″
Description :
• The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.
• Allows integration into statistical process control and measurement systems for
models with measurement data output connector. -
D110 | External measurement – Measuring range : 0-10 mm | KROEPLIN
External measurement
Measuring range : 0-10 mm
Order No. D110
