- Sort by Popularity
- Display 24 Products per page
-
122-109-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 200-225 mm
Order No.: 122-109-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-412 | Outside Micrometer with Anvil Extension Collars 1400-1500 mm | MITUTOYO
Order No. 105-412
Outside Micrometer with Anvil Extension Collars
Range : 1400-1500 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-106 | Caliper Type Micrometers Series 143, 125-150 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-106
Range : 125-150 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-127 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 50-75 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-127
Range : 50-75 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-110 | Disk Micrometer – Hardened Steel Disk Series 123, 225-250 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-110
Range : 225-250 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-352-30 | Disk Micrometer – Non-Rotating Spindle, IP65 Inch/Metric, 2-3″ | MITUTOYO
Disk Micrometer – Non-Rotating Spindle – IP65
Order No. : 369-352-30
Range : 2-3″
Disk : 20mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force. -
395-353-30 | Tube Micrometer, Inch/Metric, 2-3″ | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-353-30
Range : 2-3″
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
342-271-30 | Crimp Height Micrometer, 0-20mm | MITUTOYO
CRIMP HEIGHT MICROMETER
Range : 0-20 mm
Order No. 342-271-30
• Measures the height of crimp contacts.
• Equipped with Ratchet Stop for constant measuring force.
• IP65 water / dust protection (Digimatic model). -
342-252-30 | Point Micrometer – Series 342, 25-50 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-252-30
Range : 25-50 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
314-253-30 | V-Anvil Micrometer – 3 Flutes, 25-40 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-253-30
Range : 25-40 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
156-101-10 | Micrometer Stands – Series 156 | MITUTOYO
MICROMETER STANDS – SERIES 156
Description
• Dedicated stand for micrometers.
• Designed to allow benchtop use of hand micrometers or other gages which have frames suitable for gripping by the clamp.
Reduces the influence of temperature changes due to body heat, enabling higher accuracy measurement.Order No. 156-101-10
-
350-254-30 | Digimatic Micrometer Head – Series 350 | MITUTOYO
DIGIMATIC MICROMETER HEAD – SERIES 350
Order no. 350-254-30
Range : 0-25 mm
Description :
• Equipped with digital display and output.
• 350-28X-30, 350-261-30, 350-38X-30 and 350-361-30 are protection grade IP65, water-proof Digimatic micrometer heads.
• Digimatic models can be easily integrated into statistical process control and measurement systems.
