- Sort by Popularity
- Display 12 Products per page
-
177-300 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-300
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
530-118 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm/0-8″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.03mm
Order No. 530-118
Range : 0-200mm/0-8″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
516-976 | Rectangular Gauge Block Sets (0.001 mm Step Block Sets) : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets : SERIES 516
0.001 mm Step Block Sets
Order No. : 516-976
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
516-833| Rectangular Gauge Block Sets (Wear Block Sets)-Ceramic : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets – Ceramic : SERIES 516
Wear Block Sets
Order No. : 516-833
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
293-678-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 2-3.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-678-20
Range : 2-3.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
05CZA625 | DIGIMATIC CABLE WITH DATA BUTTON IP TYPE 2M, CALIPER TYPE | MITUTOYO
DIGIMATIC CABLE WITH DATA BUTTON IP TYPE
2M, CALIPER TYPE | MITUTOYO
-
293-244-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 0-25 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-668-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 50-80 mm | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-668-20
Range : 50-80 mm• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-312 | Outside Micrometer Series 102, 25-50 mm, 0.001mm | MITUTOYO
Outside Micrometer Series 102
Range : 25-50 mm
Graduation : 0.001 mm
Order No. : 102-312
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-162 | Outside Micrometer Series 103, 625-650 mm | Mitutoyo
Outside Micrometer Series 103
Range 625-650 mm
Graduation 0.01 mm
Order No. 103-162
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
193-902 | Digit outside Micrometer Series 193, 0-100 mm (4 pcs.) | MITUTOYO
Digit Outside Micrometer Series 193
Range : 0-100 mm (4 pcs.)
Order No. : 193-902
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
146-222 | Groove Micrometers -Non-Rotating Spindle Series 146 – 0-25 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-222
Flange : 12.7 mm
• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle.
