- Sort by Popularity
- Display 12 Products per page
-
311-111 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
523-121 | Dial Snap Meter Series 510, 0-25 mm | MITUYOYO
Dial Snap Meter Series 510
Range : 0-25 mm
Order No. : 523-121
• Suitable for quick pass / fail inspection of mass-produced components.
• Greatly improved accuracy: indication accuracy and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process.
• Hard-coated crystal: enhanced oil and scratch resistance. -
700-119-30 | QUICKmini Series 700 | MITUTOYO
QUICKmini Series 700
Range : 0-12 mm
Order No. : 700-119-30
• Lightweight, compact, palm-sized device.
• Measurement of small, thin workpieces is possible by only a single operation.
• Electromagnetic induction type ABSOLUTE encoder is adopted.
• Built-in ABS (absolute) scale requires no zero-set every time the power is turned on. In addition, reliability has improved by eliminating overspeed errors. -
422-233-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-233-30
Range : 75-100 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-523 | Outside Micrometer with Interchangeable Anvils, 600-700 mm | MITUTOYO
340-523
Outside Micrometer with Interchangeable Anvils | 600-700 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
125-107 | Screw Thread Micrometer, 25-50 mm, 0.6-0.9 mm/44-28TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-107
Range : 25-50 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
124-177 | Gear Tooth Micrometer, 100-125 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-177
Range : 100-125 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional.