- Sort by Popularity
- Display 12 Products per page
-
611685 | Gauge Blocks with a Calibrated Coefficient of Thermal Expension – 500mm | Mitutoyo
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 500mm | Mitutoyo
Order No. : 611685
Length : 500 mm
Description :
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm. -
182-501-60 | STANDARD SCALES SERIES 182 – Made of Low Expansion Glass | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are considered top-grade length standards.
• Standard scales can be used as a traceable standard of length for calibrating measuring instruments.
-
141-001 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-001
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
395-261-30 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
Tube Micrometer – Spherical and Cylindrical Anvil Type – Series 395
Range : 0-25 mm
Order No : 395-261-30
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
02AZD730G | U-WAVE-T, IP67 TYPE WIRELESS TRANSMITTER | MITUTOYO
U-WAVE-T, IP67 TYPE
WIRELESS TRANSMITTER
-
107-205 | Indicator Type Micrometer Series 107, 100-125 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 100-125 mm
Order No. : 107-205
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
147-303 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-303
Range : 50-75 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
122-115-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 250-275 mm
Order No.: 122-115-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-413 | Outside Micrometer with Anvil Extension Collars 1500-1600 mm | MITUTOYO
Order No. 105-413
Outside Micrometer with Anvil Extension Collars
Range : 1500-1600 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-108 | Caliper Type Micrometers Series 143, 175-200 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-108
Range : 175-200 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-125 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-125
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-114 | Disk Micrometer – Disks with Carbide Tips Series 123, 25-50 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-114
Range : 25-50 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range).
