- Sort by Popularity
- Display 12 Products per page
-
614631 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614631
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
157-101 | OPTICAL PARALLELS – SERIES 157 | MITUTOYO
OPTICAL PARALLELS SET, METRIC
Order No. 157-101
Description
• Designed to inspect parallelism and flatness of measuring faces of micrometers.
• Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. -
151-211 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-211
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
311-225 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
500-776 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-776
Range : 0-150 mm
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
-
147-301 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-301
Range : 0-25 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-160 | Outside Micrometer Series 103, 575-600 mm | Mitutoyo
Outside Micrometer Series 103
Range 575-600 mm
Graduation 0.01 mm
Order No. 103-160
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
406-253-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 75-100 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 75-100 mm
Resolution : 0.001 mm
Order No. : 406-253-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
117-108 | “Uni-Mike” Interchangeable Anvil Micrometer, 1-2″ | MITUTOYO
“Uni-Mike” Interchangeable Anvil Micrometer Series 117
Order No. 117-108
Range : 1-2″
• A selection of interchangeable anvils (rod anvils and V-anvils) enables measurement of tube thickness, rivet head height and similar features just by replacing the anvil to suit.
• Equipped with Ratchet Stop for constant measuring force. -
122-142-10 | Blade Micrometer – non rotating spindle type (Carbide tip) – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type (Carbide Tip) – Series 122
Range: 25-50 mm
Order No.: 122-142-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-420 | Outside Micrometer with Anvil Extension Collars 1400-1600 mm | MITUTOYO
Order No. 105-420
Outside Micrometer with Anvil Extension Collars
Range : 1400-1600 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
125-102 | Screw Thread Micrometer, 0-25 mm, 0.6-0.9 mm/44-28TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-102
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads.
