เครื่องมือวัดละเอียด

MICROMETER HEAD – FINE SPINDLE FEED OF 0.25mm/rev – SERIES 148

MITUTOYO

Order no. 148-323-10

Range: 0-6.5mm

Description :

• Micrometer head with 0.25 mm spindle pitch is convenient for fine-feed and fine-positioning applications.

FIXTURE FOR MICROMETER HEAD | MITUTOYO

Order No. : 303583

Description :

Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:

• These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
• Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-263

Range : 0.425-0.5″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO

Non-Interchange-Head Set

Order No. : 468-984

Range : 50-75 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

2-POINT INTERNAL MICROMETER HOLTEST SET  | MITUTOYO

Order No. 368-906

Range: 2-3mm

Description

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 10-12mm

Order No. : 568-364

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

ABSOLUTE BOREMATIC SERIES 568

INTERCHANGEABLE-HEAD BORE GAGE STES

Order No. : 568-956

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE

Order No. : 133-166

Range : 625-650mm

Description :

• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment.

TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE

Order No.: 139-175

Range : 100-1300mm

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.

INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE

Order No. 141-117

Range: 200-500mm

Description:

• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods.

BORE GAGE SERIES 511 – FOR SMALL HOLES

Order No. 511-204-20

Range: 10-18.5mm

Description :

• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request.

BORE GAGE SERIES 511 – WITH MICROMETER HEAD

Order No.: 511-804

Range: 100-160 mm

Description: