- Sort by Popularity
- Display 12 Products per page
-
568-470 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 2-2.5″ | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 2-2.5″
Order No. : 568-470
Description :
This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
It offers you the following benefits:- It enables you to take measurements easily and quickly.
- Titanium-coated measuring pins gives you excellent durability and impact resistance.
- 330° rotatable display unit also gives you easy reading at any angle.
- GO/NG tolerance judgement function.
-
133-152 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 275-300mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-152
Range : 275-300mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
337-301 | TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE, 200-1000 mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE
Order No. : 337-301
Range : 200-1000mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
145-187 | INSIDE MICROMETER SERIES 145 – CALIPER TYPE, 50-75mm | MITUTOYO
INSIDE MICROMETER SERIES 145 – CALIPER TYPE
Order No. 145-187
Range: 50-75mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
526-153-20 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 3.70 – 7.30mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-153-20
Range: 3.70 – 7.30 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-722-20 | BORE GAGE SERIES 511, 35-60mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-722-20
Range: 35-60 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
511-813-20 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 60-100mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-813-20
Range: 60-100 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
177-222 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-222
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-290 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-290
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-774 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-774
Range : 0-150 mm
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
-
500-159-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside measurement*
Order No. : 500-159-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-124 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*High accuracy model*
Order No. 530-124
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.