- Sort by Popularity
- Display 12 Products per page
-
536-121 | POINT CALIPER SERIES 536, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 536
Order No.: 536-121
Range : 0-150 mm
Description :
This vernier point caliper has extra fine ground measuring jaws. It offers you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
515-720 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
126-131 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 150-175 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-131
Range : 150-175 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
167-103 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-103
Length : 75 mm
-
148-854 | Micrometer Heads – Small Thimble Dimeter Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148
Order no. 148-854
Range: 0-13mm
Description :
• Measuring range of 13 mm.
• The thimble can be set to zero at any position by loosening the setscrew. -
151-260-10 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-260-10
Range: 0-50mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
148-323-10 | Micrometer Heads – Fine Spindle Feed of 0.25mm/rev – SERIES 148 | MITUTOYO
MICROMETER HEAD – FINE SPINDLE FEED OF 0.25mm/rev – SERIES 148
MITUTOYO
Order no. 148-323-10
Range: 0-6.5mm
Description :
• Micrometer head with 0.25 mm spindle pitch is convenient for fine-feed and fine-positioning applications.
-
303574 | Fixture for Micrometer Head | MITUTOYO
FIXTURE FOR MICROMETER HEAD | MITUTOYO
Order No. : 303574
Description :
Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
- These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
- Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.
-
468-180 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-180
Range : 250-275 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
468-980 | Digimatic Holtest – 3-point Internal Micrometers Set (Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Interchange-Head Set
Order No. : 468-980
Range : 4-8″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-178 | Holtest – Three-Point Internal Micrometer Holtest 200-225mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-178
Range. 200-225mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-994 | Holtest (Type II) – 3 Point Internal Micrometer Set 100-200mm (4 pcs.) | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST SET (TYPE II) MITUTOYO
Order No. : 368-994
Range: 100-200mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).
