- Sort by Popularity
- Display 12 Products per page
-
511-703 | BORE GAGE SERIES 511, 50-150mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-703
Range: 50-150 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
511-806 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 250-400mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-806
Range: 250-400 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
953554 | EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
Order No. 953554
Description
• Extension Rods enable measurement of deeper holes when attached to a bore gage.
Note 1: When using an extension rod that is 500 mm or longer, hold the bore gage upright during measurement.
Note 2: Only one extension rod can be attached to a bore gage. It is not possible to use more than one extension rod.
Note 3: The extension rod cannot be used for products with a custom size or custom specifications.
-
177-284 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-284
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-425 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-425
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-762-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-762-20
Range : 0-6″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-166-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide tipped jaws for outside and inside measurement*
Order No. : 500-166-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-114 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm/0-8″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-114
Range : 0-200mm/0-8″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
531-122 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-122
Range : 0-150mm/0-6″
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
552-304-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-1000mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-304-10
Range : 0-1000 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
07CZA056 | INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES | MITUTOYO
INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES
Order No.: 07CZA056
Type: Standard
-
534-114 | LONG JAW VERNIER CALIPER-SERIES 534, 0-500mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-114
Range : 0-500 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
