- Sort by Popularity
- Display 12 Products per page
-
515-110 | AUXILIARY BLOCK KIT SERIES 515 – for BORE GAGE – OPTIONAL ACCESSORIES | MITUTOYO
• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.
-
D110 | External measurement – Measuring range : 0-10 mm | KROEPLIN
External measurement
Measuring range : 0-10 mm
Order No. D110
-
193-102 | Digit outside Micrometer Series 193, 25-50 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 25-50 mm
Order No. : 193-102
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
536-212 | SWIVEL VERNIER CALIPER SERIES 536 – MOVING JAW TYPE, 0-200mm | MITUTOYO
SWIVEL VERNIER CALIPER SERIES 536
MOVING JAW TYPE
Order No. 536-212
Range : 0-200mm
Description :
These vernier calipers have a swivelling jaw. They offer you the following benefits:
- You can rotate the moving jaw to measure sectioned shafts.
- With depth bar.
-
515-374 | DIGITAL HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
323-253-30 | Disk Micrometer Series 323, 75-100 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-253-30
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
148-207-10 | Micrometer Heads – Ultra-small Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – ULTRA-SMALL – SERIES 148
Clamp Nut, Spherical Spindle
Order no. 148-207-10
Range: 0-6.5mm
Description :
• Miniature micrometer heads for ease of incorporating into machines.
-
149-802-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-802-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
148-223-10 | Micrometer Heads – Locking-screw Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – LOCKING-SCREW TYPE – SERIES 148
MITUTOYO
Order no. 148-223-10
Range: 0-6.5mm
Description :
• Locking screw provides secure locking at any position of the spindle.
• Position of the locking screw is the same as the sleeve index line.
-
110-107-10 | Micrometer Heads – Differential Screw Thread Translator (Extra-Fine Feed) Type – SERIES 110 | MITUTOYO
MICROMETER HEAD – DIFFERENTIAL SCREW THREAD TRANSKATOR (Extra-Fine Feed) – SERIES 110
MITUTOYO
Order no. 110-107-10
Range: 0-1mm
Description :
• The differential movement of spindle thread and nut allows ultra-fine feeding.
-
303566 | Fixture for Micrometer Head | MITUTOYO
FIXTURE FOR MICROMETER HEAD | MITUTOYO
Order No. : 303566
Description :
Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
- These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
- Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.
-
468-264 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-264
Range : 0.5-0.65″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.
