- Sort by Popularity
- Display 12 Products per page
-
611646-021 | Individual Metric Rectangular Gauge Blocks – 6.5mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 6.5mm | Mitutoyo
Order No. : 611646-021
Length : 6.5 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611660-021 | Individual Metric Rectangular Gauge Blocks – 20.5mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 20.5mm | Mitutoyo
Order No. : 611660-021
Length : 20.5 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611858 | Individual Metric Rectangular Gauge Blocks – 131.4mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 131.4mm | Mitutoyo
Order No. : 611858
Length : 131.4 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
65M | THICKNESS GAUGE – 25 Pieces /1Set – 0.03-1.00 mm | SK NIGATA SEIKI
THICKNESS GAUGE – NO. 65M | SK NIGATA SEIKI
25 Pieces / 1Set – 0.03-1.00 mm
Model No : 65M
Size 0.03-1.00 mm
-
182-522-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
-
MX-500N/1000N | Motorized Test Stand MX Series | IMADA
Motorized Test Stand MX Series
Achieves high repeatability with constant testing speed and position
Handles a wide range of test applications such as tension, compression and peel test
Offers overload prevention and force control function when connected with force gauge ** Activated when ZTS/ZTA series force gauge and CB-508 cable are used together.
Three Modes
• Manual mode : The head moves when press and hold the button.
• Single cycle mode : The head starts moving after press the button, and it returns automatically when is reaches travel limit.
• Continuous cycle mode : The head repeats travelling between its upper and lower travel limit. -
K330T | Measurement of foamed material and foils – Measuring range : 0-30 mm | KROEPLIN
Measurement of foamed material and foils
Measuring range : 0-30 mm
Order No. : K330T
-
573-605-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-160mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-605-20
Range 10.1-160 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
126-129 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 100-125 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-129
Range : 100-125 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
111-120 | Spline Micrometer, 125-150 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-120
Range. : 125-150 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
148-504 | Micrometer Heads – Small Thimble Dimeter Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148
Order no. 148-504
Range: 0-13mm
Description :
These are a standard type of small size micrometer heads with a zero-adjustable thimble.
They offer the following benefits:- You can make a zero-setting at any position by loosening the setscrew in the thimble.
