- Sort by Price
- Display 12 Products per page
-
QL/QLE2 – Ratchet Head Type Adjustable Torque Wrench ประแจขันปอนด์ | TOHNICHI
QL/QLE2 – Ratchet Head Type Adjustable Torque Wrench – TOHNICHI
ASSEMBLY | ADJUSTABLE | RATCHET HEAD | GRADUATION | ISO6789:2003, 2017
● Basic adjustable click style with resin grip
● Torque value easily set with external scale and knob. -
167-262 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Metric (unified) θ = 60°
Order No. 167-262
-
MX-500N/1000N | Motorized Test Stand MX Series | IMADA
Motorized Test Stand MX Series
Achieves high repeatability with constant testing speed and position
Handles a wide range of test applications such as tension, compression and peel test
Offers overload prevention and force control function when connected with force gauge ** Activated when ZTS/ZTA series force gauge and CB-508 cable are used together.
Three Modes
• Manual mode : The head moves when press and hold the button.
• Single cycle mode : The head starts moving after press the button, and it returns automatically when is reaches travel limit.
• Continuous cycle mode : The head repeats travelling between its upper and lower travel limit. -
530-101 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm
Order No. 530-101
Range : 0 – 150mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
ENDMILLS – STANDARD LENGTH SERIES 121 M.A.FORD
Solid Carbide TuffCut® GP 2 Flute End Mill
Designed for general purpose milling of most materials- 2 Flute
- Solid carbide
- Uncoated or available with TiN, Altima® and TiCN coating. T=TiN, A=ALtima® (ALTiN), C=TiCN coated
- Micro decimal sizes .005″-.100″ and 0.2mm-2.0mm
- Center cutting
- Standard flute lengths
- 30° Helix angle
- For roughing and finishing applications
- Square end and corner radius options
- Material Applications: Steels, Hardened Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Non-Ferrous
