- Sort by Price
- Display 12 Products per page
-
395-251-30 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-251-30
Range : 0-25mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
128-101 DEPTH MICROMETER SERIES 128, 0-25mm, Base 63.5×16 | MITUTOYO
DEPTH MICROMETER SERIES 128 – MITUTOYO
Order No. : 128-101
Range : 0-25 mm
Base : 63.5×16
Description :
This Depth Micrometer offers you the following benefits:
- ø4mm measuring rod.
- Ratchet stop provides you with constant measuring force.
- Measuring rod lock.
- Carbide-tipped measuring rod model is available.
-
QLK | ADJUSTABLE, RATCHET TORQUE WRENCHSประแจปอนด์แบบปรับตั้งแรงขัน หัวฟรีซ้าย-ขวา BESTOOL-KANON
ประแจปอนด์แบบปรับตั้งแรงขัน หัวฟรีซ้าย-ขวา
QLK | ADJUSTABLE, RATCHET TORQUE WRENCHSFreely set torque values within the capacity range. Replaceable socket, ratchet wrenches.
FEATURES
● The ratchet improves efficiency. These wrenches are well suited forepetitive work.
● By replacing the sockets, various sizes of fasteners can be tightened within the tool’s capacity range.
● By reversing the ratchet, the wrench can be used to loosen fasteners counter-clockwise.
● Tightening to a torque setting can only be done clockwise.
● Accuracy : ±3% of indicated value over the full range.ADJUSTABLE THE TORQUE SETTING
♦ 30QLK~5600QLK
(1) Lossen the lock screw. (See Fig.1)
(2) Turn the sub-scale and adjust to a torque value
(the main scale plus the sub-scale) (See Fig.2)
(3) Tighten the lock screw.
(If the lock screw hits the pin before completely tightening, then change the position of the pin)
♦ 7000QLK~21000QLK-8
(1) When applicable, mount the extension bar snugly all the way onto the body of the wrench.
(2) With the extension bar mounted (See Fig.3), insert the hexagonal side of the adjusting box wrench.
● Without the extension bar (See Fig.4), insert the hexagonal side of the adjusting box wrench into the body.
(3) Turn the adjusting box wrench to set the torque value. (the main scale plus the sub-scale) -
113-103 | Limit Micrometer Series 113, 25-50 mm | Mitutoyo
Limit Micrometer : Series 113
Range : 25-50 mm
Order No. 113-103
• Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits.
• Measuring faces: Carbide.
