- Sort by Popularity
- Display 12 Products per page
-
611741-021 | Individual Metric Rectangular Gauge Blocks – 2.41mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 2.41mm | Mitutoyo
Order No. : 611741-021
Length : 2.41 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611655-021 | Individual Metric Rectangular Gauge Blocks – 15.5mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 15.5mm | Mitutoyo
Order No. : 611655-021
Length : 15.5 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611677 | Individual Metric Rectangular Gauge Blocks – 70mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 70mm | Mitutoyo
Order No. : 611677
Length : 70 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
148-866 | Micrometer Heads – Small Thimble Dimeter Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148
Order no. 148-866
Range: 0-13mm
Description :
• Measuring range of 13 mm.
• The thimble can be set to zero at any position by loosening the setscrew. -
IMT-50K (011170) | TELESCOPING INSPECTION MIRROR | SK NIIGATA SEIKI
TELESCOPING INSPECTION MIRROR
Suitable for inspection of hard-to-see locations
USE
● Inspection of hard-to-see locationsMATERIAL
● Body： Brass
（IMT-60LR, IMT-80LK： Stainless steel）
● Mirror： GlassFEATURES
● Extendable reach and easy to carry
● Replacement mirror also sold separately
●With mirror protective film -
515-376 | DIGITAL HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
500-702-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Comforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER with Dust/Water Protection Comforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-702-20
Range : 0 – 150 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
571-254-20 | DEPTH GAGE SERIES 571 – HOOK END TYPE, 0-150mm | MITUTOYO
DEPTH GAGE SERIES 571 – HOOK END TYPE
Order No. 571-254-20
Depth Range : 10.1-160mm
Hook Range : 0-150 mm
Description :
This Digital Depth Gauge is IP67 and offers you the following benefits:
- It has excellent resistance against water and dust (IP67 protection level) enabling you to use it in situations that include coolant fluid.
- Direct reading by pressing the OFFSET function, which compensates for the 10 mm width of the hook (hook type).
