- Sort by Popularity
- Display 12 Products per page
-
511-807 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 400-600mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-807
Range: 400-600 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
953557 | EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
Order No. 953557
Description
• Extension Rods enable measurement of deeper holes when attached to a bore gage.
Note 1: When using an extension rod that is 500 mm or longer, hold the bore gage upright during measurement.
Note 2: Only one extension rod can be attached to a bore gage. It is not possible to use more than one extension rod.
Note 3: The extension rod cannot be used for products with a custom size or custom specifications.
-
177-133 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-133
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-430 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-430
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-769-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-769-20
Range : 0-6″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-502-10 | LONG ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with Exclusive ABSOLUTE Encoder Technology | MITUTOYO
LONG ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with Exclusive ABSOLUTE Encoder Technology
Order No.: 500-502-10
Range: 0-1,000 mm
Deacription :
• Long Digital caliper incorporating an ABSOLUTE scale and available with a measuring range from 450 mm to 1000 mm.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.
-
532-101 | VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT 0-130mm | MITUTOYO
VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT
Order No.: 532-101
Range : 0-130 mm
Description :
• Fine-adjustment aids slider positioning.
• Allows step measurement. -
505-735 | DIAL CALIPER SERIES 505 – 0-150mm – CARBIDE TIPPED JAWS | MITUTOYO
DIAL CALIPER SERIES 505 – Carbide tipped jaws for outside and inside measuring
Order No.: 505-735
Range : 0-150 mm
Description :
This metric dial caliper allows you to take reliable measurements and offers you the following benefits:
- Ultra-smooth sliding and high shock protection
- Easy to read dial with large character height
-
552-185-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-2000mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-185-10
Range: 0-2000mm
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
534-106 | LONG JAW VERNIER CALIPER-SERIES 534, 0-500mm / 0-20″ | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-106
Range : 0-500 mm / 0-20″
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
573-621-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-621-20
Range : 0-150 mm
Description :
These point calipers have extra fine ground measuring jaws. They offer you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
536-172 | HOOK TYPE VERNIER CALIPER SERIES 536, 0-200mm | MITUTOYO
HOOK TYPE VERNIER CALIPER SERIES 536
Order No. 536-172
Range : 0-200 mm (2.1-200)
Description :
• Allows measurement of stepped inside Measurement example diameter section of cylinders.
• 536-172 is equipped with a fine-adjustment wheel to enable precise feed and adjustment.
