- Sort by Popularity
- Display 12 Products per page
-
104-136A | Outside Micrometer with Interchangeable Anvils, 150-300 mm | MITUTOYO
Order No. 104-136A
Outside Micrometer with Interchangeable Anvils
Range : 150-300 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
125-107 | Screw Thread Micrometer, 25-50 mm, 0.6-0.9 mm/44-28TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-107
Range : 25-50 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
223-101 | Disk Micrometer Series 223, 0-25 mm | MITUTOYO
Disk Micrometer (Mechanical counter Model)
Order No. 223-101
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
124-181 | Gear Tooth Micrometer, 200-225 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-181
Range : 200-225 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
118-101 | Sheet Metal Micrometer, 0-25mm, Flat Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 118
This Sheet Metal Micrometer is designed with a deep frame for measuring the thickness of sheet material.
Order No. 118-101
Range : 0-25
Throat depth : 100 mm
Measuring Surface : Flat / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
395-264-30 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
Tube Micrometer – Spherical and Cylindrical Anvil Type – Series 395
Range : 0-25 mm
Order No : 395-264-30
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
111-124 | Spline Micrometer, 225-250 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-124
Range. : 225-250 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-216 | Point Micrometer with Carbide Tip – Series 112, 75-100 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-216
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
155-129 | Telescoping Gage – Series 155 | MITUTOYO
TELESCOPIC GAGE – SERIES 155
Order No. 155-129
• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.
-
326-251-30 | Screw Thread Micrometer- Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometers
Order No. 326-251-30
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional. -
293-181-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 1-2″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 1-2″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-333-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Inch / Metric
Range : 3-4″ mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.
