- Sort by Popularity
- Display 12 Products per page
-
293-676-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 0-1.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-676-20
Range : 0-1.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-911-40 | Outside Micrometer Set Series 102, 0-100 mm| MITUTOYO
Outside Micrometer Series 102
Range : 0-100 mm
Order No. : 102-911-40
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-164 | Outside Micrometer Series 103, 675-700 mm | Mitutoyo
Outside Micrometer Series 103
Range 675-700 mm
Graduation 0.01 mm
Order No. 103-164
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-201 | Indicator Type Micrometer Series 107, 0-25 mm, without indicator | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 0-25 mm
Order No. : 107-201
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-224 | Groove Micrometers -Non-Rotating Spindle Series 146 – 50-75 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-224
Flange : 12.7 mm
• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle. -
422-331-30 | Blade Micrometer – non rotating spindle type – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422
Range: 1-2″
Order No.: 422-331-30
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-525 | Outside Micrometer with Interchangeable Anvils, 800-900 mm | MITUTOYO
340-525
Outside Micrometer with Interchangeable Anvils | 800-900 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
104-143A | Outside Micrometer with Interchangeable Anvils, 400-500 mm | MITUTOYO
Order No. 104-143A
Outside Micrometer with Interchangeable Anvils
Range : 400-500 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
125-110 | Screw Thread Micrometer, 25-50 mm, 3.5-5 mm/8-5TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-110
Range : 25-50 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-109 | Disk Micrometer – Hardened Steel Disk Series 123, 200-225 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-109
Range : 200-225 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
124-195 | Gear Tooth Micrometer, 275-300 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-195
Range : 275-300 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
118-114 | Sheet Metal Micrometer, 0-25mm, Spherical Anvil | MITUTOYO
SHEET METAL MICROMETER – SERIES 118
This Sheet Metal Micrometer is designed with a deep frame for measuring the thickness of sheet material.
Order No. 118-114
Range : 0-25
Throat depth : 150 mm
Measuring Surface : Spherical / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force.
