- Sort by Popularity
- Display 24 Products per page
-
505-731 | DIAL CALIPER SERIES 505 – 0-200mm | MITUTOYO
DIAL CALIPER SERIES 505
Order No.: 505-731
Range : 0-200 mm
Description :
This metric dial caliper allows you to take reliable measurements and offers you the following benefits:
- Ultra-smooth sliding and high shock protection
- Easy to read dial with large character height
-
552-195-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-80″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-195-10
Range: 0-80″
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
573-612-20 | OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-200mm | MITUTOYO
OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-612-20
Range : 0-200 mm
Description :
These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:- You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.
-
573-652-20 | NECK CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE (Point jaw type)
Order No.: 573-652-20
Range : 0-150 mm
Description :
• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable. -
573-718-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 -EDGE-TO-CENTER TYPE, 10.1-200mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-718-20
Range: 10.1-200 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
500-704-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-704-20
Range : 0-300 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-175-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-175-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-119 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm/0-12″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.04mm
Order No. 530-119
Range : 0-300mm/0-12″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
914053 | CLAMP BOX – OPTION ACCESSORIES | MITUTOYO
CLAMP BOX – OPTION ACCESSORIES | MITUTOYO
Order No. : 914053
for Item : 552-302-10 / 552-155-10 / 552-303-10 / 552-156-10
552-312-10 / 552-165-10 / 552-313-10 / 552-166-10
-
160-150 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-12″/0-300mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-150
Range: 0-12″ / 0-300 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
536-106 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-200mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-106
Range : 10.1-200 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
573-281-30 | ABSOLUTE SNAP CALIPER SERIES 573, 0-4″ | MITUTOYO
ABSOLUTE SNAP CALIPER SERIES 573
Order No. 573-281-30
Range : 0-4″
Description :
• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.
• Snap mechanism allows continuous and easy measurement without moving the
slider by using the lever.
• Displacement of snap part is 2 mm.
• Measuring force : 7 N to 14 N
