- Sort by Popularity
- Display 12 Products per page
-
500-177-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-177-30
Range : 0-8″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
552-304-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-1000mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-304-10
Range : 0-1000 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
573-706-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0.404-8.4″ | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-706-20
Range 0.404-8.4″
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
500-463 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-463
Range : 0-4″
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
552-160-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with Long Jaws, 0-18″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Long Jaws
Order No. : 552-160-10
Range : 0-18″
Description :
This is a lightweight standard model of Digimatic caliper with extra-long jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
552-302-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-450mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-302-10
Range : 0-450 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
551-331-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-331-10
Range : 0-300mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-195-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-80″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-195-10
Range: 0-80″
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
500-197-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-197-30
Range : 0-8″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
552-305-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-1500mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-305-10
Range : 0-1500 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
573-719-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – EDGE-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-719-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
550-331-20 | ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS 0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS
Order No. : 550-331-20
Range : 0-300 mm
Description :
This is a Digimatic caliper with nib-style jaws that lets you measure inside dimensions.
It offers you the following benefits:- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.