- Sort by Popularity
- Display 12 Products per page
-
614604 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614604
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614652 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614652
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614803 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614803
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
611685 | Gauge Blocks with a Calibrated Coefficient of Thermal Expension – 500mm | Mitutoyo
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 500mm | Mitutoyo
Order No. : 611685
Length : 500 mm
Description :
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm. -
182-501-60 | STANDARD SCALES SERIES 182 – Made of Low Expansion Glass | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are considered top-grade length standards.
• Standard scales can be used as a traceable standard of length for calibrating measuring instruments.
-
193-102 | Digit outside Micrometer Series 193, 25-50 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 25-50 mm
Order No. : 193-102
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
105-408 | Outside Micrometer with Anvil Extension Collars 1000-1100 mm | MITUTOYO
Order No. 105-408
Outside Micrometer with Anvil Extension Collars
Range : 1000-1100 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
264-620 | U-WAVE FIT, IP67 TYPE WIRELESS TRANSMITER FOR CALIPER | MITUTOYO
U-WAVE FIT, IP67 TYPE WIRELESS TRANSMITER FOR CALIPER
-
193-111 | Digit outside Micrometer Series 193, 0-25 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 0-25 mm
Order No. : 193-111
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-205 | Indicator Type Micrometer Series 107, 100-125 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 100-125 mm
Order No. : 107-205
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
147-303 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-303
Range : 50-75 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
122-115-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 250-275 mm
Order No.: 122-115-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force.
