- Sort by Popularity
- Display 12 Products per page
-
614628 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614628
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
STEEL PIN GAUGE SET – AA SERIES | SK NIIGATA SEIKI
STEEL PIN GAUGE SET – AA SERIES | SK NIIGATA SEIKI
The most standard and popular type pin gauge. Available
SUB-ZERO（Cryogenic hardened）TREATMENT
※ 2,700mm or over●The most popular type
●Individual pin gauges are also available（plastic case included）
●Custom made Pin Gauges are available on request
●Aluminum Pin Vise is included with AA-0A to AA-9B.
Pin Vise is included with AA-0E to AA-6F.
●For above 1.000mm, nominal size is marked on gauge
●Provide with individual pin gauge standNominal Size Step Length Tolerance Out of Diameter Hardness (mm) (mm) (mm) (μm) Roundness (μm) Inequality (μm) (HV) 0.05 0.01 step 5 ±0.5 0.5 1.0 More than 720 0.06 … 0.09 0.01 step 10 ±0.5 0.5 1.0 More than 720 0.10 … 0.19 0.01 step 40 ±0.8 0.5 1.0 More than 720 0.200… 0.999 0.001step 40 ±0.8 0.5 1.0 More than 720 1.000… 2.699 0.001step 50 ±0.8 0.5 1.0 More than 720 2.700…10.000 0.001step 50 ±0.8 0.5 1.0 More than 650 10.01 …20.00 0.01 step 50 ±1.5 0.8 1.6 More than 650 20.01 …30.00 0.01 step 50 ±2 1.6 3.2 More than 650 30.01 …41.00 - 50 ±3 3 6 More than 650 ※ 5mm from each edge is not precision guaranteed ※ 30.01 〜 41.00 are custom made
Pin gauges are slightly chamfered on both edge at the following level;
Ø 1mm…Approx. 0.03mm Ø 3mm…Approx. 0.1mm Ø 5mm…Approx. 0.2mm
Ø 7mm…Approx. 0.25mm Ø 10mm…Approx. 0.3mmAA series (0.010mm step)
Model No. Nominal Size (mm) Pins per set Aluminum Pin Vise Weight
(Including case)AA-00 0.06 • 0.07 • 0.08 ⋯⋯ 0.290 27 - 0.90kg AA-0A 0.200 • 0.210 • 0.220 ⋯⋯ 0.500 31 APV-0A 0.95kg AA-0B 0.500 • 0.510 • 0.520 ⋯⋯ 1.000 51 APV-0B 1.02kg AA-1A 1.000 • 1.010 • 1.020 ⋯⋯ 1.500 51 APV-1A 1.03kg AA-1B 1.500 • 1.510 • 1.520 ⋯⋯ 2.000 51 APV-1B 1.06kg AA-2A 2.000 • 2.010 • 2.020 ⋯⋯ 2.500 51 APV-2A 1.09kg AA-2B 2.500 • 2.510 • 2.520 ⋯⋯ 3.000 51 APV-2B 1.13kg AA-3A 3.000 • 3.01. • 3.020 ⋯⋯ 3.500 51 APV-3A 1.18kg AA-3B 3.500 • 3.510 • 3.520 ⋯⋯ 4.000 51 APV-3B 1.23kg AA-4A 4.000 • 4.010 • 4.020 ⋯⋯ 4.500 51 APV-4A 1.29kg AA-4B 4.500 • 4.510 • 4.520 ⋯⋯ 5.000 51 APV-4B 1.37kg AA-5A 5.000 • 5.010 • 5.020 ⋯⋯ 5.500 51 APV-5A 1.44kg AA-5B 5.500 • 5.510 • 5.520 ⋯⋯ 6.000 51 APV-5B 1.53kg AA-6A 6.000 • 6.010 • 6.020 ⋯⋯ 6.500 51 APV-6A 1.63kg AA-6B 6.500 • 6.510 • 6.520 ⋯⋯ 7.000 51 APV-6B 1.73kg AA-7A 7.000 • 7.010 • 7.020 ⋯⋯ 7.500 51 APV-7A 2.33kg AA-7B 7.500 • 7.510 • 7.520 ⋯⋯ 8.000 51 APV-7B 2.45kg AA-8A 8.000 • 8.010 • 8.020 ⋯⋯ 8.500 51 APV-8A 2.58kg AA-8B 8.500 • 8.510 • 8.520 ⋯⋯ 9.000 51 APV-8B 2.71kg AA-9A 9.000 • 9.010 • 9.020 ⋯⋯ 9.500 51 APV-9A 2.85kg AA-9B 9.500 • 9.510 • 9.520 ⋯⋯ 10.000 51 APV-9B 3.00kg AA-10A 10.00 • 10.01 • 10.02 ⋯⋯ 10.50 51 - 3.12kg AA-10B 10.50 • 10.51 • 10.520 ⋯⋯ 11.00 51 - 3.29kg AA-11A 11.00 • 11.01 • 11.02 ⋯⋯ 11.50 51 - 3.46kg AA-11B 11.50 • 11.51 • 11.52 ⋯⋯ 12.00 51 - 3.64kg AA-12A 12.00 • 12.01 • 12.02 ⋯⋯ 12.50 51 - 3.83kg AA-12B 12.50 • 12.51 • 12.52 ⋯⋯ 13.00 51 - 4.03kg AA-13A 13.00 • 13.01 • 13.02 ⋯⋯ 13.50 51 - 4.24kg AA-13B 13.50 • 13.51 • 13.52 ⋯⋯ 14.00 51 - 4.45kg AA-14A 14.00 • 14.01 • 14.02 ⋯⋯ 14.50 51 - 4.67kg AA-14B 14.50 • 14.51 • 14.52 ⋯⋯ 15.00 51 - 4.90kg AA-15A 15.00 • 15.01 • 15.02 ⋯⋯ 15.50 51 - 5.14kg AA-15B 15.50 • 15.51 • 15.52 ⋯⋯ 16.00 51 - 5.38kg AA-16A 16.00 • 16.01 • 16.02 ⋯⋯ 16.50 51 - 5.79kg AA-16B 16.50 • 16.51 • 16.52 ⋯⋯ 17.00 51 - 6.05kg AA-17A 17.00 • 17.01 • 17.02 ⋯⋯ 17.50 51 - 6.32kg AA-17B 17.50 • 17.51 • 17.52 ⋯⋯ 18.00 51 - 6.60kg AA-18A 18.00 • 18.01 • 18.02 ⋯⋯ 18.50 51 - 6.88kg AA-18B 18.50 • 18.51 • 18.52 ⋯⋯ 19.00 51 - 7.18kg AA-19A 19.00 • 19.01 • 19.02 ⋯⋯ 19.50 51 - 7.48kg AA-19B 19.50 • 19.51 • 19.52 ⋯⋯ 20.00 51 - 7.78kg AA series (0.005mm step)
Model No. Nominal Size (mm) Pins per set Aluminum Pin Vise Weight
(Including case)AA-0E 0.500 • 0.505 • 0.510 ⋯⋯ 0.750 51 PV-0B 1.12kg AA-0F 0.750 • 0.755 • 0.760 ⋯⋯ 1.000 51 PV-0B 1.12kg AA-1C 1.000 • 1.005 • 1.010 ⋯⋯ 1.250 51 PV-1A 1.13kg AA-1D 1.250 • 1.255 • 1.260 ⋯⋯ 1.500 51 PV-1A 1.14kg AA-1E 1.500 • 1.505 • 1.510 ⋯⋯ 1.750 51 PV-1B 1.15kg AA-1F 1.750 • 1.755 • 1.760 ⋯⋯ 2.000 51 PV-1B 1.17kg AA-2C 2.000 • 2.005 • 2.010 ⋯⋯ 2.250 51 PV-2A 1.18kg AA-2D 2.250 • 2.255 • 2.260 ⋯⋯ 2.500 51 PV-2A 1.20kg AA-2E 2.500 • 2.505 • 2.510 ⋯⋯ 2.750 51 PV-2B 1.22kg AA-2F 2.750 • 2.755 • 2.760 ⋯⋯ 3.000 51 PV-2B 1.24kg AA-3C 3.000 • 3.005 • 3.010 ⋯⋯ 3.250 51 PV-3A 1.27kg AA-3D 3.250 • 3.255 • 3.260 ⋯⋯ 3.500 51 PV-3A 1.30kg AA-3E 3.500 • 3.505 • 3.510 ⋯⋯ 3.750 51 PV-3B 1.33kg AA-3F 3.750 • 3.755 • 3.760 ⋯⋯ 4.000 51 PV-3B 1.36kg AA-4C 4.000 • 4.005 • 4.010 ⋯⋯ 4.250 51 PV-4A 1.39kg AA-4D 4.250 • 4.255 • 4.260 ⋯⋯ 4.500 51 PV-4A 1.42kg AA-4E 4.500 • 4.505 • 4.510 ⋯⋯ 4.750 51 PV-4B 1.46kg AA-4F 4.750 • 4.755 • 4.760 ⋯⋯ 5.000 51 PV-4B 1.50kg AA-5C 5.000 • 5.005 • 5.010 ⋯⋯ 5.250 51 PV-5A 1.54kg AA-5D 5.250 • 5.255 • 5.260 ⋯⋯ 5.500 51 PV-5A 1.58kg AA-5E 5.500 • 5.505 • 5.510 ⋯⋯ 5.750 51 PV-5B 1.62kg AA-5F 5.750 • 5.755 • 5.760 ⋯⋯ 6.000 51 PV-5B 1.67kg AA-6C 6.000 • 6.005 • 6.010 ⋯⋯ 6.250 51 PV-6A 1.71kg AA-6D 6.250 • 6.255 • 6.260 ⋯⋯ 6.500 51 PV-6A 1.76kg AA-6E 6.500 • 6.505 • 6.510 ⋯⋯ 6.750 51 PV-6B 1.81kg AA-6F 6.750 • 6.755 • 6.760 ⋯⋯ 7.000 51 PV-6B 1.87kg AA-7C 7.000 • 7.005 • 7.010 ⋯⋯ 7.250 51 - 2.26kg AA-7D 7.250 • 7.255 • 7.260 ⋯⋯ 7.500 51 - 2.32kg AA-7E 7.500 • 7.505 • 7.510 ⋯⋯ 7.750 51 - 2.38kg AA-7F 7.750 • 7.755 • 7.760 ⋯⋯ 8.000 51 - 2.44kg AA-8C 8.000 • 8.005 • 8.010 ⋯⋯ 8.250 51 - 2.50kg AA-8D 8.250 • 8.255 • 8.260 ⋯⋯ 8.500 51 - 2.57kg AA-8E 8.500 • 8.505 • 8.510 ⋯⋯ 8.750 51 - 2.64kg AA-8F 8.750 • 8.755 • 8.760 ⋯⋯ 9.000 51 - 2.71kg AA-9C 9.000 • 9.005 • 9.010 ⋯⋯ 9.250 51 - 2.78kg AA-9D 9.250 • 9.255 • 9.260 ⋯⋯ 9.500 51 - 2.85kg AA-9E 9.500 • 9.505 • 9.510 ⋯⋯ 9.750 51 - 2.93kg AA-9F 9.750 • 9.755 • 9.760 ⋯⋯ 10.000 51 - 3.00kg -
150-804 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-804
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
182-532-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
-
141-001 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-001
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
395-261-30 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
Tube Micrometer – Spherical and Cylindrical Anvil Type – Series 395
Range : 0-25 mm
Order No : 395-261-30
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
02AZD730G | U-WAVE-T, IP67 TYPE WIRELESS TRANSMITTER | MITUTOYO
U-WAVE-T, IP67 TYPE
WIRELESS TRANSMITTER
-
107-205 | Indicator Type Micrometer Series 107, 100-125 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 100-125 mm
Order No. : 107-205
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
147-303 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-303
Range : 50-75 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
122-115-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 250-275 mm
Order No.: 122-115-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-413 | Outside Micrometer with Anvil Extension Collars 1500-1600 mm | MITUTOYO
Order No. 105-413
Outside Micrometer with Anvil Extension Collars
Range : 1500-1600 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-108 | Caliper Type Micrometers Series 143, 175-200 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-108
Range : 175-200 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
