- Sort by Popularity
- Display 12 Products per page
-
500-752-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-752-20
Range : 0-6″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-193-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-193-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-316 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*Clamping screw below the slider
Order No. 530-316
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-207-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-1000mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-207-10
Range : 0-1000mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-164-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with Long Jaws, 0-80″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Long Jaws
Order No. : 552-164-10
Range : 0-80″
Description :
This is a lightweight standard model of Digimatic caliper with extra-long jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
160-125 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-12″/0-300mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-125
Range: 0-12″ / 0-300 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
536-105 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-150mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-105
Range : 10.1-150 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
573-654-20 | NECK CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-654-20
Range : 0-150 mm
Description :
• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable. -
570-244 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-8″ | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-244
Range : 0-8″
Description
• ABS and INC measurement modes allow efficient operation.
• Rigid structure makes instrument suitable for use in severe work environments.
• The +/- measurement function widens the application range.
• Allows integration into statistical process control and measurement systems.
• Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
• Battery life is 5,000 hours under normal use.
• Carbide-tipped scriber (900173 for 570-227 and 244, and 905200 for 570-230 and 248) is provided as a standard accessory. (Standard accessory: scriber clamp 901338 for 570-227 and 244, and 05GZA033 for 570-230 and 248)
• When a dial indicator or test indicator is used with 570-227, the dedicated holding bar (953639, overall length 50 mm) is recommended for use. However, instrumental error may be larger because the measurement point is further from the beam.
• For precision Black Granite Surface Plates. -
527-203 | VERNIER DEPTH GAGE SERIES 527, 0-300mm | MITUTOYO
VERNIER DEPTH GAGE SERIES 527
Order No. 527-203
Range : 0-300 mm
Description :
This vernier depth gauge offers you the following benefits:
- Its base and measuring faces are hardened and micro-lapped for robustness.
- Fine adjustment models available
-
983535 | INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES, 275-300mm | MITUTOYO
INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES
Order No. 983535
Range: 275-300mm
-
571-262-20 | ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 571, 0-8″/0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 571 – MITUTOYO
IP67 Coolant Proof model
Order No. 571-262-20
Range : 0-8″/0-200mm
Description :
This is a standard model Digital Depth Gauge.
It offers you the following benefits:- ABSOLUTE System gives you reliable measurements.
- Its base and measuring faces are hardened and micro-lapped for robustness.
- Large character height makes measurements easy to read.
- Exceptional battery life.
