- Sort by Price
- Display 12 Products per page
-
500-443 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-443
Range : 0-100 mm
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
515-720 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
QL/QLE2 – Ratchet Head Type Adjustable Torque Wrench ประแจขันปอนด์ | TOHNICHI
QL/QLE2 – Ratchet Head Type Adjustable Torque Wrench – TOHNICHI
ASSEMBLY | ADJUSTABLE | RATCHET HEAD | GRADUATION | ISO6789:2003, 2017
● Basic adjustable click style with resin grip
● Torque value easily set with external scale and knob. -
167-262 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Metric (unified) θ = 60°
Order No. 167-262
-
MX-500N/1000N | Motorized Test Stand MX Series | IMADA
Motorized Test Stand MX Series
Achieves high repeatability with constant testing speed and position
Handles a wide range of test applications such as tension, compression and peel test
Offers overload prevention and force control function when connected with force gauge ** Activated when ZTS/ZTA series force gauge and CB-508 cable are used together.
Three Modes
• Manual mode : The head moves when press and hold the button.
• Single cycle mode : The head starts moving after press the button, and it returns automatically when is reaches travel limit.
• Continuous cycle mode : The head repeats travelling between its upper and lower travel limit. -
530-101 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm
Order No. 530-101
Range : 0 – 150mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
