- Sort by Price
- Display 12 Products per page
-
ENDMILLS – STANDARD LENGTH SERIES 121 M.A.FORD
Solid Carbide TuffCut® GP 2 Flute End Mill
Designed for general purpose milling of most materials- 2 Flute
- Solid carbide
- Uncoated or available with TiN, Altima® and TiCN coating. T=TiN, A=ALtima® (ALTiN), C=TiCN coated
- Micro decimal sizes .005″-.100″ and 0.2mm-2.0mm
- Center cutting
- Standard flute lengths
- 30° Helix angle
- For roughing and finishing applications
- Square end and corner radius options
- Material Applications: Steels, Hardened Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Non-Ferrous
-
เครื่องมืออุตสาหกรรม-เครื่องมือกัดแต่งโลหะ-Drills-Straight Shank-Carbide-Long-15WHNSB-SD MOLDINO
Carbide Oil Hole Non Step Borer for Aluminium (15 ∼ 30D)
-
343-250-30 | Caliper Type Micrometers Series 343, 0-25 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-250-30
Range : 0-25 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
345-250-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 5-30mm | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-250-30
Range: 5-30 mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
192-130 | DIAL HEIGHT GAGE SERIES 192 – WITH DIGITAL COUNTER, 0 – 300mm | MITUTOYO
DIAL HEIGHT GAGE SERIES 192
WITH DIGITAL COUNTER
Order No.: 192-130
Range: 0-300mm
Dimension :
This Dial Height Gauge offers you the following benefits:- It allows you easy and error-free reading with both up and down digital counters as well as a dial.
- It comes with a hand wheel so you can easily make rough adjustments.
- A carbide-tipped scriber is provided.
-
314-252-30 | V-Anvil Micrometer – 3 Flutes, 10-25 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-252-30
Range : 10-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
