- Sort by Price
- Display 12 Products per page
-
QLK | ADJUSTABLE, RATCHET TORQUE WRENCHSประแจปอนด์แบบปรับตั้งแรงขัน หัวฟรีซ้าย-ขวา BESTOOL-KANON
ประแจปอนด์แบบปรับตั้งแรงขัน หัวฟรีซ้าย-ขวา
QLK | ADJUSTABLE, RATCHET TORQUE WRENCHSFreely set torque values within the capacity range. Replaceable socket, ratchet wrenches.
FEATURES
● The ratchet improves efficiency. These wrenches are well suited forepetitive work.
● By replacing the sockets, various sizes of fasteners can be tightened within the tool’s capacity range.
● By reversing the ratchet, the wrench can be used to loosen fasteners counter-clockwise.
● Tightening to a torque setting can only be done clockwise.
● Accuracy : ±3% of indicated value over the full range.ADJUSTABLE THE TORQUE SETTING
♦ 30QLK~5600QLK
(1) Lossen the lock screw. (See Fig.1)
(2) Turn the sub-scale and adjust to a torque value
(the main scale plus the sub-scale) (See Fig.2)
(3) Tighten the lock screw.
(If the lock screw hits the pin before completely tightening, then change the position of the pin)
♦ 7000QLK~21000QLK-8
(1) When applicable, mount the extension bar snugly all the way onto the body of the wrench.
(2) With the extension bar mounted (See Fig.3), insert the hexagonal side of the adjusting box wrench.
● Without the extension bar (See Fig.4), insert the hexagonal side of the adjusting box wrench into the body.
(3) Turn the adjusting box wrench to set the torque value. (the main scale plus the sub-scale) -
113-103 | Limit Micrometer Series 113, 25-50 mm | Mitutoyo
Limit Micrometer : Series 113
Range : 25-50 mm
Order No. 113-103
• Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits.
• Measuring faces: Carbide. -
536-171 | HOOK TYPE VERNIER CALIPER SERIES 536, 0-200mm | MITUTOYO
HOOK TYPE VERNIER CALIPER SERIES 536
Order No. 536-171
Range : 0-200 mm (10.1-200)
Description :
• Allows measurement of stepped inside diameter section of cylinders.
-
ENDMILLS – STANDARD LENGTH SERIES 140 M.A.FORD
Solid Carbide TuffCut® GP 4 Flute End Mill Ball NoseDesigned for milling fillets or similar rounded corners in the bottom of a cut. Ideal for most ferrous metal applications.- • 4 Flute
- • Solid carbide
- • Uncoated or available with TiN, ALtima® and TiCN coating. T=TiN, A=ALtima® (ALTiN), C=TiCN coated
- • Center cutting
- • Standard flute lengths
- • Ball nose
- • 30° Helix angle
- • For roughing and finishing applications
- • Material Applications: Steels, Hardened Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Non-Ferrous
-
เครื่องมืออุตสาหกรรม-เครื่องมือกัดแต่งโลหะ-Drills-Straight Shank-Carbide-Long-10FWHNSB-TH-Moldino
Carbide Oil Hole Non Step Borer for Cast Iron (10D)10FWHNSB-TH
-
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
511-761 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-761
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand.
