- Sort by Popularity
- Display 24 Products per page
-
500-763-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-763-20
Range : 0-8″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-166-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide tipped jaws for outside and inside measurement*
Order No. : 500-166-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-115 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm/0-12″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-115
Range : 0-300mm/0-12″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-227-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-40″/0-1000mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-227-10
Range : 0-40″/0-1000mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-183-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-1000mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-183-10
Range: 0-1000mm
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
534-105 | LONG JAW VERNIER CALIPER-SERIES 534, 0-300mm / 0-12″ | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-105
Range : 0-300 mm / 0-12″
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
573-716-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – CENTER-TO-CENTER TYPE, 10.1-200mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
CENTER-TO-CENTER TYPE
Order No.: 573-716-20
Range: 10.1-200 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
573-761-20 | TUBE THICKNESS CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
TUBE THICKNESS CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No. 573-761-20
Range : 0-6″
Description :
• The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.
• Allows integration into statistical process control and measurement systems for
models with measurement data output connector. -
514-105 | VERNIER HEIGHT GAGE SERIES 506 – STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE, 0-18″ | MITUTOYO
VERNIER HEIGHT GAGE SERIES 506
STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE
Order No. 514-105
Range : 0-18″
Description :
This vernier height gauge offers you the following benefits:
- You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales.
- A carbide-tipped scriber is provided.
-
129-155 | DEPTH MICROMETER SERIES 129 – INTERCHANGEABLE ROD TYPE, 0-25mm | MITUTOYO
DEPTH MICROMETER SERIES 129
INTERCHANGEABLE ROD TYPE
Order No. : 129-155
Range : 0-25 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
128-102 | DEPTH MICROMETER SERIES 128, 0-25mm, Base 101.6×16 | MITUTOYO
DEPTH MICROMETER SERIES 128 – MITUTOYO
Order No. : 128-102
Range : 0-25 mm
Base : 101.6×16
Description :
This Depth Micrometer offers you the following benefits:
- ø4mm measuring rod.
- Ratchet stop provides you with constant measuring force.
- Measuring rod lock.
- Carbide-tipped measuring rod model is available.
-
571-312-20 | DEPTH GAGE SERIES 571 – PIN END TYPE, 0-8″/0-200mm | MITUTOYO
DEPTH GAGE SERIES 571 – PIN END TYPE
Order No. 571-312-20
Range: 0-8″ / 0-200 mm
Description :
This Digital Depth Gauge is IP67 and offers you the following benefits:
- It has excellent resistance against water and dust (IP67 protection level) enabling you to use it in situations that include coolant fluid.
- Direct reading by pressing the OFFSET function, which compensates for the 10 mm width of the hook (hook type).
